Selection of Acid Types to Achieve Uniform Stimulation in Long Laterals of Horizontal Wells
Notice bibliographique
Résumé
Abstract Horizontal wells with long laterals are being used to develop low-permeability carbonate reservoirs in the world. After completion of a well, acidizing is usually conducted to remove the potential damage caused by drilling and completion. However, in bullheading acid injection, it is usually difficult for the acid to distribute evenly along a lateral due to quick consumption of acid along the wellbore, especially in MRC (Maximum Reservoir Contact) wells or wells with long laterals (>1000m). In many cases the toe area is even left un-stimulated at all. Different types of retarded acids are being developed in industry to reduce acid consumption rate in order to let them penetrate further, but the effective travelling distances of these acids are never systemically studied and compared, leaving field engineers a difficulty in selecting an acid for a specific well. In our work, the properties of different types of acids in industry are reviewed. A flow and reaction model with consideration of acid flow friction and acid-rock reaction kinetics is established and a method is found to solve it. Five typical cases are run based on the model and the results of an effective acid flowing distance, effective acid reacting distance and effective acid travelling distance are obtained and compared. Based on our study, two principles of selecting acid types for horizontal wells with long laterals are proposed: "flow to the toe" and "react to the toe", which mean the friction of an acid as well as the leak off rate of the acid should be small enough to let the fluid reach the toe under a given injection rate; the diffusion rate of H+ and the acid-rock reaction rate must be small enough to ensure that the acid is still active when it reaches the toe. Four key considerations are proposed regarding acid type selection: acid flow friction, acid leak off rate, mass transfer of H+, and acid-rock reaction rate. A general guideline for the key parameter control and acid type selection to achieve a good acid distribution in the wellbore under different conditions is also shown. Field engineers can use our guideline to select acid candidates initially, and then use our model and program to quantitatively evaluate if the acid can effectively cover the whole lateral length.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,001 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».