STREAMS HEAT INTEGRATION IN THE SEPARATION PROCESS OF THE FURFURAL-WATER HETEROAZEOTROPIC MIXTURE BY USING TWO STRETCHING COLUMNS
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
The process of azeotropic mixtures rectification takes place in many branches of the chemical industry. This process requires significant energy consumption both for heating and evaporation of process streams, and for vapor condensation and cooling of products. The consumption of external energy essentially depends on the methods of separation processes organization. Pinch analysis is one of the modern methods for designing chemical-technological systems with the aim of optimal use of external energy sources by maximizing the heat integration of system process streams, taking into account the limitations of a particular manufacture, the requirements of environmental safety and environmental protection. In this paper the heat integration of the heteroazeotropic furfural-water mixture separation process by two columns was considered. In each column the azeoptrope is a light-boiling one, and one of the mixture components is a low-boiling one. The heat and material balances of the rectifying plant were calculated and the table of its streams was formed, that is, the data of the chemical-technological system were extracted. From the total set of heat streams, the subset was selected for heat integration. Composite curves for the selected heat streams subject to heat integration were built and their relative position on the temperature-enthalpy diagram was analyzed. This analysis showed that for a certain value of the minimum temperature difference in the heat exchange equipment Тmin, there is a threshold problem. The problem was formulated for a value of Тmin slightly less than the threshold value that led to a slight increase in the consumption of external energy carriers. Options for further improvement of the network of heat exchangers were considered, and the occurrence of a cycle through the pseudopinch was identified. It gave possibility to remove a heat exchanger with a low load and redistribute this load among to other ones. Restoring Тmin in this case is impossible, because a strict restriction on the absence of hot utilities is accepted. Significant savings in external utilities load have been demonstrated. For retrofit modern Alfa Laval heat exchange equipment was selected for all the necessary positions.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,001 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle