Robust anti-icing curved surfaces based on buckling metallicplates
Notice bibliographique
Résumé
Ice accretion remains a decade-old challenge due to the degradation in the performance of iced surfaces.Prior icephobic coatings have faced challenges in terms of durability due to exposure to severe icing conditions.Buckling Elastomer-like Anti-icing Metallic Surfaces (BEAMS) were previously presented as a robust system with low ice adhesion strength in realistic icing conditions.BEAMS consist of suspending partially confined, thin, flat metal sheets on an array of adhesives, facilitating a buckling instability in the sheet that causes easy ice removal from the surface.However, the gap of air between the metal sheet and substrate increases the flexibility of the system, and high-velocity droplet impact can then cause the metal sheet to contact the substrate.This leads to an order of magnitude increase in ice adhesion strength.To withstand high-velocity droplet impact, the flexural rigidity can be increased by making BEAMS curved, which is also more similar to realistic surfaces such as the leading edges of aircraft wings and wind turbine blades.However, increasing the flexural rigidity of BEAMS using curvature limits the out-of-plane deformation as compared to flat sheets, and this increases the sheet buckling resistance and consequently alters the ice removal mechanism.Here, we investigate the effect of BEAMS curvature on its ice adhesion strength in an icing wind tunnel.An ice adhesion strength of ice 3 kPa was observed due to increasing the compliance of the material used for suspending the thin metal sheet.It was also numerically studied how lateral torsional buckling in the suspension material of BEAMS altered the radius of curvature in the metal sheet and initiated an interfacial crack as the curvature of accreted ice remained unchanged.Further, the configuration of BEAMS was investigated to understand its effect on lateral torsional buckling.As a result, increasing the number of strips decreased the change in the radius of curvature.However, elastomer deformation would serve as a crack initiation site at the ice/metal interface above each strip.This numerical result was validated by the spin rig experiment measurements, where a higher number of strips results in lower ice adhesion strength.Accordingly, the extremely low ice adhesion strength of BEAMS, even on curved surfaces, was due to buckling instabilities either within the thin metal plates or the suspension material.Overall, BEAMS with extreme durability and low ice adhesion strength would become a promising anti-icing candidate material even for complex geometries in the aerospace industry.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».