Cyclic deformation behavior of a high-strength low-alloy (HSLA) magnesium alloy with heterostructures
Notice bibliographique
Résumé
Strain-controlled cyclic deformation behavior of a high-strength low-alloy (HSLA) Mg-1.2Zn-0.1Ca alloy fabricated via low-temperature extrusion at 150 °C was investigated at different strain amplitudes. Due to the partial dynamic recrystallization (DRX) during extrusion, the extruded HSLA magnesium alloy consisted of a unique heterostructure containing coarse unDRX grains and ultra-fine DRX grains of 0.8 µm, leading to a high tensile yield strength of 374 MPa and an elongation of 14%. The HSLA magnesium alloy exhibited cyclic stabilization at strain amplitudes of ≤0.4%, while cyclic hardening occurred at strain amplitudes of ≥0.6%. In contrast, the homogenized alloy with a uniform coarse-grained microstructure showed a strong cyclic hardening characteristic. Compared with the homogenized alloy, the HSLA magnesium alloy had a significantly higher cyclic stress level at all strain amplitudes, along with a longer fatigue life at lower and intermediate strain amplitudes owing to its higher monotonic strength. However, the homogenized alloy showed a longer fatigue life at a high strain amplitude of 0.8 % due to its better ductility and stronger capacity of storing deformation. While {10–12}<10−11> extension twinning occurred in both the homogenized and HSLA samples at high strain amplitudes, twins were primarily formed in the coarse unDRX grains in the compressive phase during cyclic deformation due to the c-axes of unDRX grains perpendicular to the loading direction, with twinning in the ultra-fine DRX grains being suppressed. The low-cycle fatigue life of both the homogenized and HSLA samples can be well predicted through an accumulative damage model based on the strain-energy density calculation and intrinsic fatigue toughness concept.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,001 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».