Investigating the Synergistic Impact of Cenosphere and Mg-Sn Alloy on the Tribological and Mechanical Properties of Aluminum Foam Composites
Notice bibliographique
Résumé
The objective of this investigation is to enhance the mechanical and tribological properties of aluminum foam composites through the incorporation of cenospheres and a Mg-Sn alloy.Cenospheres, lightweight ceramic microspheres, are integrated as fillers within the metal matrix composites, capitalizing on their high strength-to-weight ratio and buoyancy.The synergistic effect of the Mg-Sn alloy addition is postulated to fortify the composite, augmenting its strength.These lightweight yet robust composites are poised to offer significant benefits in sectors demanding high performance and reduced weight, such as aerospace, automotive, and biomedical engineering.A meticulous examination of density, hardness, friction coefficients, and wear rates was conducted.It was observed that the inclusion of cenospheres precipitated a decrease in density from 2.51 to 2.01 g/cm 3 with a volume fraction increase from 0 to 55%.The introduction of 0.8% Mg-Sn alloy to a blend of 55% cenosphere and 44.2% aluminum resulted in a density increment to 2.14 g/cm 3 .Concurrently, the Vickers hardness exhibited an increase from 37 HV to 53 HV with a rising cenosphere concentration and further escalated to 57 HV upon the addition of the Mg-Sn alloy.Tribological testing revealed that the friction coefficient diminished from 0.293 to 0.235 µ with an escalated cenosphere volume from 25 to 55%.The integration of 0.4% Mg and 0.4% Sn alloy was demonstrated to significantly enhance the friction behavior compared to the pure aluminum and aluminum-cenosphere composites at a 55% volume fraction.The wear rate exhibited a pronounced decrease from 1.957 × 10 -6 to 1.1245 × 10 -6 g/cm under a 10 N load, which correlated with the increasing cenosphere content.This trend persisted under 20 N and 30 N loads, where wear rates diminished with a higher cenosphere volume fraction.The composition comprising 55% cenosphere and 0.8% Mg-Sn alloy manifested the lowest wear rates across varying stress conditions.Compression testing underscored a consistent decrease in compressive strength from 160 MPa to 65 MPa as the cenosphere content rose from 0 to 55%.However, the composite with 55% cenosphere sees a dramatic rise in compressive strength when Mg and Sn are introduced at 0.8 vol.%.Observed changes in density, hardness, friction and wear rates indicate that composite properties can be improved.These composites have the ability to combine mechanical strength with lightweight design, making them attractive for industrial applications.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,001 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,003 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,001 | 0,001 |
| Intégrité de la recherche | 0,000 | 0,001 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».