The Development of the Stress-Free Polishing System Based on the Positioning Error Analysis for the Deterministic Polishing of Jet Electrochemical Machining
Notice bibliographique
Résumé
Deterministic polishing based on jet electrochemical machining (Jet-ECM) is a stress-free machining method for low-rigidity and ultra-precision workpieces. The nozzle is equivalent to a special tool in deterministic polishing, and the workpiece material is removed using the mechanism of electrochemical dissolution at the position where the nozzle passes. By precisely regulating the nozzle's movement speed and dwell time, the quantity of material removed from the workpiece at a designated position can be finely adjusted. With this mechanism, the improvement of the workpiece shape accuracy can be achieved by planning the nozzle trajectory and nozzle movement speed. However, due to the positioning errors of the polishing device, the actual position of the nozzle may deviate from the theoretical position, resulting in errors in material removal amount, which affects the accuracy and stability of the polishing process. This study established a mathematical model to analyze the influence of nozzle positioning errors in deterministic polishing based on Jet-ECM. This model has been used to design a specific deterministic polishing device based on Jet-ECM. With the proposed deterministic polishing device, the surface shape of the workpiece is converged. The surface peak-to-valley (PV) value of the φ 50 mm workpiece (valid dimensions = 90% of the central region) indicated that the shape error of the surface was reduced from 2.67 μm to 1.24 μm in 34 min. The power spectral density (PSD) method was used to evaluate the height distribution and height characteristics of the workpiece surface. The results show that the low frequency spatial error is reduced significantly after processing. This study improves the accuracy of the stress-free deterministic polishing methods and further expands the use of deterministic polishing in industry.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,001 |
| Études des sciences et des technologies | 0,001 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,001 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».