Development of a High-Performance Asphalt Concrete with Enhanced Low-Temperature Performance
Notice bibliographique
Résumé
This study aims to develop a high-performance asphalt concrete (HPAC) by using waste asphaltenes to modify the binder and incorporating polyethylene terephthalate (PET) fibres to enhance the performance of asphalt mix at low temperature. As such, a method is proposed to reduce the cracking potential of HPAC mixtures composed of asphaltenes-modified binders by the addition of PET fibres. First, performance properties of a crude oil binder modified with 12% asphaltenes are evaluated by artificially short-term and long-term ageing of the binder using rolling thin-film oven (RTFO) and pressure aging vessel (PAV) procedures, respectively. Superpave binder tests are conducted on the binders through a rotational viscometer, dynamic shear rheometer, and bending beam rheometer. For modifying the HPAC mixture, 6 mm long PET fibres are used at a concentration of 0.15% where it is first tested for compactibility, reflecting field practical considerations. Then, two performance tests, namely dynamic modulus and indirect tensile strength test at low temperatures (−20°C, −10°C, and 0°C), are conducted for an effective mechanical evaluation of the mixture modifications. The results of binder performance grading tests reveal that when the base binder, with continuous PG 70.2-25.9, is modified with 12% asphaltenes, it achieves a continuous PG 82.9-21.8 with a high PG that is suitable for demanding asphalt applications. Although the addition of asphaltenes increases binder stiffness, resulting in a decrease in low-temperature grading, the overall improvement in high-temperature performance outweighs this drawback. Additionally, compactibility tests demonstrate that mixes with 0.15% PET fibres exhibit acceptable compactibility and meet the prescribed air void requirements of a maximum 6%. Furthermore, the incorporation of PET fibres in HPAC mixes increase stiffness by 63% at a 15°C and 10 Hz loading frequency, with no negative impact on the anticipated response. Compared to control mixes where no asphaltenes or fibres are used, the asphaltenes modification and PET fibre incorporation increase fracture energy by up to 27% at −10°C, indicating lower cracking potential and improved low-temperature performance. Moreover, tensile strength is enhanced by up to 18% at 0°C, demonstrating an efficient combined effect of both modifications.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,001 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».