Managed Surface Temperature/Pressure in Real-Time Drilling for Gas Migration and Wellbore Stability Detection in Subsurface
Notice bibliographique
Résumé
Wellbore stability and gas migration detection from a gas-saturated formation are important for engineer during production and drilling. Erroneous onset of gas migration and wellbore collapse may be predicted if no accurate bottom hole pressure (BHP) is obtained in real time, despite a reliable geomechanics and gas migration models are utilized. Pressure along a tubing-annulus system must be calculated from the surface to the bottom hole, where thermal-hydraulic-mechanical (THM) may be coupled through wellbore wall to those inside the porous formations. A wellbore-reservoir model including tubing-annulus-reservoir system is established so that a pressure profile coupled to the inflow/outflow of the gas-saturated porous formations may be achievable. Coupled to each other inside the tubing-annulus system, thermal-hydraulic (TH) is managed and coupled to those THM in the formation so that wellbore stability and gas influx from the formation and migration along the annulus are forecasted. Along managed pressure drilling (MPD), managed temperature (MT) is also critically important both for BHP calculation so that the wellbore stability and blowout are accurately predicted. Temperature changes in the circulated fluid may affect the BHP calculation and stress concentration at wellbore wall. In an environment of narrow drilling mud window, MT may enlarge the window and reduce the active stress concentration at wellbore wall at the same time. Along a comprehensive reservoir-wellbore model, an engineering procedure with integrated logging-geomechanics model for inputs is proposed. In this procedure, WITSMAL data reading, MEM model buildup, and wellbore collapsing/blowout detection is incorporated. Real-time WITSMAL data is processed and transferred into MEM model so that real-time critical pressure may be predicted in formation ahead of the drilling bit. Both the MEM model and wellbore stability in the drilled section are examined and corrected if erroneous results are detected. A prediction ahead of the drilling bit is forecast and safe mud weight is recommended or adjusted if pre-design mud is not adequate. A novel logging-drilling procedure focusing on geomechanics is proposed. Reading real-time WITSMAL data and modifying MEM model, on which a real-time critical wellbore pressure may be verified, wellbore stability and migrated gas before blowout in drilled section may be identified. All these processes are critically helped by MT and such a real-time modification may allow an accurate forecasting on wellbore instability and blowout risk in the section ahead of drilling bit.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,001 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,001 | 0,001 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,001 | 0,001 |
| Science ouverte | 0,001 | 0,001 |
| Intégrité de la recherche | 0,001 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,001 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».