Load Carrying Capacities of Small-Diameter Pipe Bends Under Internal Pressure: Analytical and Computational Predicitions
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Abstract The performance and embedded conservatism of common modeling approaches used for predicting load carrying capacities were evaluated for small-diameter pipe bends typically found in CANDU reactors. Comprehensive analyses were conducted using both an analytical approach and detailed finite element modelling with commercial code ABAQUS. Small diameter pipe bends, with and without local wall thinning, under loading by internal pressure were investigated. The adopted modelling approach incorporated variability in pipe bend geometry and the characterization of material properties. The results obtained indicate that load carrying capacities of small-diameter pipe bends, either with or without local wall thinning but characterized by uniform wall thickness and single parameter material strength are conservatively predicted with analytical models in principle based on the limit load approach. However, detailed finite element modelling is needed for obtaining more accurate predictions of plastic instability pressure for pipe bends with local wall thinning. The reported investigation provides technical insights into the modelling approaches presently used for predicting load carrying capacities of small-diameter pipe bends under internal pressure loading; in addition, it has explored embedded conservatism while recognizing the existence of involved uncertainties. The results obtained emphasize the importance of detailed characterization of pipe bend thickness and material strength in such engineering predictions. This work has been performed under Canadian Nuclear Safety Commission (CNSC) Research and Support (R&S) project R765.1. The insights obtained may be used to further assess embedded conservatism in fit for service evaluations of CANDU outlet feeders experiencing wall thinning due to Flow Accelerated Corrosion (FAC). In addition, supplementary information informs the activities related to lowering the minimum required thickness below 75% of a straight pipe thickness by Article NB-3640 of Section III of the ASME B&PV Code for design pressure.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle