Effects of Selected Fuel Cell Operating Conditions on the Distribution of Liquid Water in the Cathode Gas Diffusion Layer
Notice bibliographique
Résumé
Effective water management is required to enable polymer electrolyte fuel cells (PEFCs) to operate efficiently, particularly at the high current densities needed to make them relevant for transportation and stationary applications. The presence of liquid water can influence the performance of a PEFC when the rate of water production exceeds the rate of water removal [1]. More specifically, accumulation of water within the cell becomes problematic when the pores within the gas diffusion layer (GDL) become filled, resulting in restriction of the transport of reactants to the catalyst layer [2]. Identifying operational conditions that minimize mass transport losses associated with excess water accumulation is crucial for improving the performance of PEFCs, especially at high current densities. Additionally, GDL design plays an important role in reducing mass transport losses, with thermal conductivity being a key factor influencing the distribution of liquid water. In this work, miniaturized fuel cells were operated under various conditions and imaged in-operando using X-ray Computed Tomography (XCT) [3]. This imaging technique facilitates the evaluation of the distribution of liquid water at steady state over a range of operational conditions. The influence of current density on liquid water distribution was assessed at selected cell temperatures between 40°C and 70°C. The results of this study showed high saturations under both the land and the channel regions at 50 °C. However, the channels appeared to be dry at 70 °C, with liquid water present only under the lands. These data were compared to predictions generated using a one-dimensional (1-D) model of the through-plane GDL, which considers specific operating conditions and GDL characteristics, such as thermal conductivity [4]. These results demonstrate that the 1-D model can be used to predict the presence or absence of liquid water within the GDL (and, by extension, PEFC performance) under a broad range of operating conditions. Hence, the 1-D model may be useful for focusing future laboratory investigations. Keywords – operando, X-ray tomographic microscopy, GDL, water visualization Acknowledgement Funding for this research was provided by the Natural Sciences and Engineering Research Council of Canada, Ballard Power Systems, Simon Fraser University, Canada Foundation for Innovation, British Columbia Knowledge Development Fund, and Canada Research Chairs. References [1] O. S. Ijaodola, Z. El-Hassan, E. Ogungbemi, F. N. Khatib, T. Wilberforce, J. Thompson and A. G. Olabi, "Energy efficiency improvements by investigating the water flooding management on proton exchange membrane fuel cell (PEMFC)," Energy, vol. 179, pp. 246-267, 2019. [2] H. Xu, M. Buehrer, F. Marone, T. J. Schmidt, F. N. Buechi and J. Eller, "Effects of Gas Diffusion Layer Substrates on PEFC Water Management: Part I Operando Liquid Water Saturation and Gas Diffusion Properties," Journal of The Electrochemical Society, vol. 168, 2021. [3] F. A. Aroge, B. S. Parimalam, J. A. MacDonald, F. P. Orfino, M. Dutta and E. Kjeang, "Analysing operando 2D X-ray transmission images for liquid water distribution in polymer electrolyte fuel cells," Journal of Power Sources, vol. 564, 2023. [4] D. A. Chaulk and D. R. Baker, "Heat and Water Transport in Hydrophobic Diffusion Media of PEM Fuel Cells," Journal of The Electrochemical Society, vol. 157, 2010.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,001 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,001 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».