Interfacial tension between water and pentane saturated with methane
Notice bibliographique
Résumé
The plugging of natural gas pipelines caused by hydrate formation has been recognized as a problem in the oil and gas industry for approximately 90 years. Interfacial tension is an important physical property to understand the dynamics of multiphase flow, namely, natural gas, condensate, and water, inside the pipelines. This paper describes our measurements of the interfacial tension between water and pentane saturated with methane as a model for the fluids in the pipelines transporting gas and condensate. The measurements were conducted by the pendant drop method in the temperature range between 278.2 K and 293.2 K, and the methane pressure range between 1.1 MPa and 13.7 MPa. The uncertainty of the measurements is typically below 1.5 mN ∙ m −1 . The interfacial tension decreased with increasing temperature at 2 MPa. As for the pressure dependence at 288.2 K, with increasing pressure, the interfacial tension decreased from 49.12 mN ∙ m −1 at 1.1 MPa to 47.64 mN ∙ m −1 at 4.0 MPa. The interfacial tension remained roughly constant until 8.7 MPa with the value being 48.02 mN ∙ m −1 and then increased to 59.81 mN ∙ m −1 at 12.9 MPa. The decrease of the interfacial tension between 1.1 MPa and 4.0 MPa could be attributed to the increase of the methane molecule adsorption at the interface. In the pressure range between 4.0 MPa and 8.7 MPa, it is likely that the methane adsorption at the water – pentane interface became saturated. The increase of the interfacial tension above 8.7 MPa is a novel phenomenon which requires further investigation. Interfacial tensions of water and pentane saturated with methane at 293.2 K and 288.2 K (this work), water and decanesaturated with methane at the same temperatures (Kodera et al., 2020), and water and pentane without methane.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,001 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,001 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».