Permittivities of electric arc furnace dust/lignin mixtures as a function of temperature, frequency and gas composition
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
• The permittivities of EAF dust/lignin mixtures during reduction reactions were studied. • The effect of reducing the gas atmosphere on permittivity changes was investigated. • The cavity perturbation method was utilized for permittivity measurements. • The results revealed that the permittivities the mixtures significantly affected by gas atmosphere. Increased electrification of pyrometallurgical processes and reduced greenhouse gas (GHG) emissions are important environmental targets both in Europe and around the world. Microwave heating is considered a potential new energy source that can use electricity from renewables and is consequently a more sustainable pyrometallurgical method. Studying the permittivities of the materials of interest under different conditions is a crucial step in understanding the behavior of these materials in microwave fields and designing microwave processes. The present work aims to investigate the permittivities of electric arc furnace (EAF) dust/lignin mixtures under various conditions. The effect of the reducing gas composition on the permittivity changes as a function of temperature and frequency was studied. Reduction did not occur within the EAF dust/lignin mixture in an air atmosphere. The changes in the permittivities of the mixture were associated with reactions in the range of 500 °C–600 °C and were related to the thermal decomposition of calcium carbonate into calcium oxide and carbon dioxide. In an argon (Ar) atmosphere, the EAF dust/lignin mixture permittivities exhibited two main peaks, one at approximately 600 °C and another at approximately 840 °C and these were due to the pyrolysis of lignin (biochar formation) and the reduction of both zinc oxide and zinc ferrite to metallic zinc and iron, respectively. In a hydrogen–argon (4 % H 2 –Ar) atmosphere, the EAF dust/lignin mixture permittivities displayed two peaks at approximately 600 °C and 715 °C that were attributed to the pyrolysis of the biochar and the reduction of both zinc oxide and zinc ferrite , respectively. In the hydrogen-containing atmosphere, the second peak occurred at a lower temperature. After the second peak in both the Ar and H 2 –Ar atmospheres, when the reduction reactions were completed, rapid decreases in the permittivities were observed. At this stage, the biochar was consumed, and the metals were produced, which resulted in a decrease in the permittivities.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,001 | 0,001 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle