Heat transfer and fluid dynamics of offset unsubmerged axial and tangential jets impinging on a confined heated rotating disk
Notice bibliographique
Résumé
This study numerically investigates offset unsubmerged axial and tangential jets impingement on a confined heated rotating disk for electric motor cooling applications. The motor's rotor and stator are modeled as rotating and stationary solid regions, respectively. The multi-phase flow and heat transfer characteristics are analyzed over a range of rotational Reynolds numbers from 1 × 10 5 to 3.7 × 10 6 and jet Reynolds numbers ranging from 4.5 × 10 2 to 7.3 × 10 3 in a confined space. The jet nozzle diameter is 1.5 mm with the jet location fixed at an offset of 70 % of the disk radius. For axial and tangential jets, the ratio of jet impingement distance to nozzle diameter is held constant at 12 and 14.7, respectively. The Volume of Fluid method and a moving mesh rotation model are used to simulate the two-phase flow dynamics. The results show that axial jets achieve effective rotor cooling at a mid-range rotational Reynolds number of 2 × 10 6 and a jet Reynolds number of 7.3 × 10 3 but struggle to cool the stator due to limited oil distribution. Axial jet efficiency improves with higher jet Reynolds numbers; however, performance reduces at extreme rotational speeds, as oil contact with critical areas is reduced. Axial jets are thus most suitable for high rotor heat loads and oil flow rates, as their direct impingement enhances cooling effectiveness. In contrast, tangential jets rely heavily on an optimal velocity ratio between jet exit velocity and rotor speed to achieve efficient cooling. At rotational Reynolds number of 6.1 × 10 5 , tangential jets deliver superior heat transfer and temperature uniformity with a lower jet Reynolds number of 3.7 × 10 3 and an ideal velocity ratio of 1, which promotes oil-air mixing and helical impingement. Tangential jets also exhibit up to 23 % lower drag losses at rotational Reynolds number of 6.1 × 10 5 , and maintain lower pressure losses than axial jets, with an 15 % reduction at rotational Reynolds number of 3.7 × 10 6 due to better alignment with the rotating air. Overall, tangential jets are more efficient for lower flow rates and stator-focused cooling, while a mid-range rotational Reynolds number of 2 × 10 6 optimally balances oil distribution and cooling efficiency for both jet types.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».