Influence of Vita Enamic Hybrid Ceramic with Different Thicknesses and Translucencies on the Polymerization of Light-Cured Resin Cement: An In Vitro Study
Notice bibliographique
Résumé
Abstract This study was conducted to evaluate the effect of the CAD/CAM (computer-aided design/computer-aided manufacturing) hybrid ceramic material (Vita Enamic, Vita Zahnfabrik, Bad Säckingen, Germany) in different thicknesses and translucencies on the light irradiance and the obtained radiant exposure, and to measure the Vickers microhardness (HV) and the degree of conversion (DC%) of the light-cured resin cement (Variolink Esthetic LC, Ivoclar Vivadent, Liechtenstein); polymerized by the Vita Enamic samples with different thicknesses and translucencies. The study comprised the polymerization of light-cured resin cement samples through blocks of different thicknesses ranging from 1.0 to 3.0 mm, and two degrees of translucency, namely, translucent and highly translucent Vita Enamic sectional blocks. Light attenuation by the Vita Enamic sections was measured using visible light transmission spectrometry, verifying the accuracy of resin curing (MARC light collector, Bluelight Analytics, Canada). The radiant exposure (RE; in J/cm3) or the energy reaching the resin cement samples through Vita Enamic sections during polymerization as well as during polymerization of the resin cement samples directly without the interposition of Vita Enamic sections (control group) was measured. The polymerization efficiency of resin cement was evaluated by using HV and DC% of resin cement using Fourier transform infrared spectroscopy. The data were analyzed for normality using the Kolmogorov–Smirnov and Shapiro–Wilk tests, which indicated non-normal distribution. Non-parametric Kruskal–Wallis tests were used to determine statistical significance, with Dunn's post-hoc tests for multiple comparisons when significance was detected.Normality tests (Kolmogorov–Smirnov and Shapiro– Wilk) applied to raw data showed that the data were not normally distributed. The nonparametric Kruskal–Wallis test was used to determine statistical significance. If significance was found, multiple comparisons of the groups were tested using Dunn’s post-hoc test. The results showed a statistically significant decrease in RE (J/cm3), HV, and DC% with increasing thickness of the Vita Enamic sections. On the other hand, despite the decrease in RE (J/cm3), HV, and DC% with translucent compared with the same section thickness of the highly translucent Vita Enamic hybrid ceramic, the differences were not statistically significant. Within the limitations of this study, it can be concluded that increasing the thickness of the Vita Enamic hybrid ceramic sections reduces the light irradiance and the radiant exposure received, as well as the HV and the percentage of conversion of the light-cured resin cement Variolink Esthetic LC of neutral shade. In addition, the different translucency of the Vita Enamic hybrid ceramic, namely, translucent and highly translucent, had a small but nonsignificant effect on the light irradiance and the obtained radiation, as well as on the HV and percentage of conversion of the light-cured resin cement Variolink Esthetic LC of the neutral shade.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».