Notice bibliographique
Résumé
In present study, Tabriz Mellat Bank head office building was specifically modeled using the design builder software, and, then Bio PCM (Bio phase-change) materials were used in its external walls.The present study consists of three sections.In the first section, the phase-change materials were used in the inner layer of the wall and each of them were simulated.In the second section, the phase-change materials were used in the middle layer, and finally, in the third section, all the phase-change materials were used in the outer layer of the building.Simulation was carried out using the energy simulation engine (Energy plus software).In this software, simulation is performed in hours using the weather data of Tabriz, which is in the TMY2 format.After obtaining annual energy consumption in each of the above-mentioned scenarios, in each layer, the best type of phase-change material was selected, and then, among them, the most effective material was selected.Simulation of 12 types of phase-change materials in three layers of the wall showed that the best result was obtained by using the m91q29 material with an annual energy consumption of 103706 kWh and the air source unitary heat pump and the worst result was obtained using the m27q29 material in the middle layer with an annual energy consumption of 13,216.1 kwh and a unitary heat pump.Moreover, simulation of different heat pumps showed that two air-to-water heat pump with integrated boiler and without boiler with an annual energy consumption of 37818.31kWh had the best result and the worst results were observed in using GSHP unitary Water to air with an annual energy consumption of 111494.84kwh.Considering the optimal PCM and heat pump, it was conclude that the best state is the case in which the m91q29 material is placed in the inner layer of the wall, and one of the two ASHP Air-to-water Heat Pump, Integrated Boiler, Water Convector and ASHP Air-to-water Heat Pump, Water Convector provides cooling or heating.Moreover, the weakest state is the case in which the m27q29 material is used in the middle layer and the water-to-air geothermal heat pump is used.Given the annual power consumption in the simple state (92438.79kWh) and the optimal state (21861 kWh), it was concluded that using the optimal PCM and the most desired heat pump results in 76% reduction in power consumption, indicating the significant effects of these two parameters.Moreover, according to the numerical values of the annual power consumed by the heat pump in the simple state (92438.79kWh) and the weakest state (88569 kWh), only 4.1% reduction in power consumption was observed.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,996 | 0,991 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; les deux têtes enseignantes s’accordent sur ce qui est montré ici.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».