The nature of heavy metal contamination in organic lake sediments near the Buchans massive sulphide base metal mines, Central Newfoundland
Notice bibliographique
Résumé
The Buchans mine closed in 1984 after 57 years of operation. Several orebodies, including Luck Strike, Oriental, Old Buchans, Rothermere and MacLean, produced 16,196,876 tonnes of ore with an average grade of 14.51% Zn, 7.56% Pb, 1.33% Cu, 126 grams/tonne Ag and 1.37 grams/tonne Au. Copper (chalcopyrite), lead (galena) and Zinc (sphalerite) concentrates were shipped from the port of Botwood The baritic, polymetallic orebodies were Canada’s highest grade volcanogenic massive sulphide deposits. -- To determine the impact that mining activities in and around the Buchans community had on the watersheds of the area, six lake sediment cores were collected. Four of these were taken in Red Indian Lake and two were taken in Buchans Lake, also named Sandy Lake. All cores were extracted with a K.B. Gravity lake Sediment Corer and due to the water depth in Red Indian Lake, a Deep Water operating Kit had to be used as an attachment. -- To determine the availability of the heavy metals to the environment that might be caused by subtle changes of pH or Eh, this study utilized a four step sequential extraction procedure. The four discrete operationally defined fractions that were measured were as follows: (I) Exhangeable/Carbonate, (II) Fe/Mn Oxide, (III) Organic/Sulphide, and (IV) Silicate. -- Each core was sectioned into two centimeter intervals and total concentrations were measured on 29 elements, including Cu, Pb and Zn, on all dry sediment intervals by inductively coupled plasma-optical emission spectroscopy (ICP-OES) using HCl/HF/HClO₄ digestion. Furthermore, select base metals (Cu, Pb and Zn) were analysed on the ‘wet’ and ‘dry’ samples extracted from lake sediment core RIL2B using the four step sequential extraction procedure to determine the degree to which the various metals reported to the different phase fractions. -- The total element analysis on all cores showed significant enhancement in base metals in the upper sediment intervals, particularly in Red Indian Lake, where the concentrations of copper, lead and zinc were reported as high as 4270 ppm, 2993 ppm and 12,576 ppm (dry weight) respectively. The results for all duplicate samples showed excellent correlation demonstrating a high degree of reproducibility. The agreement between the results obtained from the standard reference materials (LKSD 1-4) and the ‘certified’ published results also demonstrated a high degree of reliability. -- The sequential extraction analyses on the ‘wet’ and ‘dry’ sediment intervals from lake sediment core RIL2B showed that a significant amount of copper, lead and zinc reported to the Exchangeable/Carbonate phase with the highest values measured as 715 ppm, 2070 ppm and 2675 ppm respectively. It was also demonstrated that sediment drying appears to have a significant redistribution effect on the amount of metal reporting to the different phases. Drying of the sediment appears to increase the amount of Cu and slightly decreases the amount of Pb and Zn reporting to the Exchangeable/Carbonate phase. The reproducibility and reliability of the sequential extraction procedure was demonstrated from the analyses of the standard reference ore MP-1A. -- In conclusion, the upper lake sediments in Red Indian Lake and Buchans Lake are heavily contaminated with base metals, with the most pronounced effects occurring in Red Indian Lake. Furthermore, as demonstrated from the high concentrations of Cu, Pb and Zn that report to the first phase of the four step sequential extraction procedure, a significant amount of the metals in the lake sediments of Red Indian Lake are potentially available for release to the environment with moderate increases in acidity. The sediments have incorporated a considerable burden of pollutants and a significant portion of the lake sediments from Red Indian Lake could be considered as hazardous waste. However, since the mine closure, the lake sediments appear to be showing reduced levels of pollutants, proper site remediation is essential for lake sediment recovery.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,001 | 0,001 |
| Études des sciences et des technologies | 0,001 | 0,001 |
| Communication savante | 0,001 | 0,000 |
| Science ouverte | 0,000 | 0,001 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».