Accessory Minerals in Felsic Igneous Rocks - Part 3: Composition of monazite-(Ce) from Paleoproterozoic granitoids and gneisses from the Fort McMurray area (Alberta, Canada)
Notice bibliographique
Résumé
This data set is the third of a series reporting chemical data for accessory minerals from felsic igneous rocks. It compiles the results of electron-microprobe spot analyses of monazite-(Ce) from various Paleoproterozoic granitoids and spatially associated gneisses located in the wider Fort McMurray area in northeastern Alberta, Canada. The data were generated in connection with the Master of Science thesis of Nathanial John Walsh (Walsh 2013) at the Department of Earth and Atmospheric Sciences of the University of Alberta, Edmonton, Canada, but remained unpublished. The thesis was part of the Helmholtz - Alberta - Initiative (HAI) between the University of Alberta and the Helmholtz Association. Interestingly, monazite from the diverse basement rocks display various kinds of pattern with respect to composition and origin. The great bulk of measured grains display variably declined chondrite-normalized LREE patterns virtually free of anomalies indicative for significant fluid-induced overprinting. We have rocks characterized by largely unzoned, chemically homogeneous grains. There are as well rocks containing nicely patchy-zoned grains showing a wide range in composition, in particular regarding the Th/LREE proportions. Here, maximum measured Th concentration amounted to 33 wt% ThO2. Incorporation of Th into the crystal structure is almost exclusively governed by the huttonite substitution reaction, i.e., Th^4+ + Si^4+ = REE^3+ + P^5+, as characteristic for this chemical type of granites (Förster 1998). The suite of rocks also included samples containing small-sized inclusions of Th-poor monazite in apatite, which formed in response to metamorphic, fluid-aided dissolution-reprecipitation processes (Harlov and Förster 2003, Harlov et al. 2005). Finally, we have a quartz monzonite containing Th-poor monazite in apatite together with matrix monazite of normal Th concentration, the origin if which is not yet fully resolved (cf. Foerster-2018-004_monazite-alberta-BSE images.pdf. presenting back-scattered electron images of monazite grains). In brief, the data set provides information on several aspects of formation and alteration of monazite in non-metamorphic and metamorphic granite. The data set published here contains the complete pile of data acquired for monazite-(Ce) and back-scattered electron (BSE) images of many of the probed grains. Chemical data are provided as Excel and machine-readable .csv files, which contain the information listed in Table 1 of the data description file. Column headers in red (only in the Excel version) indicate that the data and information provided in these columns is from Walsh (2013). “0.00” means that the concentrations of the respective elements were measured, but were below their limits of detection. Blank boxes in oxide concentrations columns indicate that the respective elements were not sought. The collection of BSE images is presented as pdf.file. The sample and grain numbers are given below each mineral image and are corresponding to the Sample No. and the Grain No. in the data table. The thesis of N. Walsh "Walsh, N.J. (2013) Geochemistry and geochronology of the Precambrian basement domains in the vicinity of Fort MacMurray, Alberta: a geothermal perspective. Master of Science thesis, Department of Earth and Atmospheric Sciences, University of Alberta, Canada" is not available online.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,004 | 0,003 |
| Études des sciences et des technologies | 0,001 | 0,000 |
| Communication savante | 0,001 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,002 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».