Finite element modeling of the heat source during welding of 415 steel joints (13%CR-4% NI) with the robotic FCAW
Notice bibliographique
Résumé
Residual stress is one of the most known problems through welding process in industry, as it caused the durability of welded part to reduce. Finite element analysis can predict the thermal distribution induced by welding process along the part, thereby calculating the residual stress. Several approaches have been developed to simulate the temperature variation and the residual stresses during welding. \n \nDespite all the efforts carried out by scholars to predict the temperature field within the welding processes, the lack of accuracy still remains an issue in the neighbouring of the heataffected zone. This study was intended to precisely calculate the thermal field within and in the vicinity of the heat affected zone through multi-pass welding using finite element analysis. A developed thermal finite element code at IREQ (Institut de recherche d'Hydro-Québec) was employed to calculate the thermal field within the multi-pass welding process. The program was modified to consider thermal properties of martensitic stainless steel 415 as the base material in order to offer a more reliable simulation of the heat transfer. Then, the capability of the program to predict the temperature distribution was evaluated at given nodes in the plate during multi-pass welding through comparison with the experimentally collected data. Goldak’s moving heat source was applied in the program to consider the induced thermal energy to the part by the welding process into the simulation. Furthermore, the element birth and death method were employed to model the deposition of the filler metal. In order to link the experimental and the numerical results, 20 thermocouples were installed in the plate, and thereby the temperature variation was monitored during welding process. \n \nThe map of micro hardness and microstructure of cross-sections were analyzed to compare with the predicted configuration of the heat-affected zone in the simulation. At last in this study, the micro-hardness of small specimens were compared upon experimentally reproduction of the analytically simulated thermal history on the specimen, to the microhardness of the node of the welded part model corresponding to this thermal history. \n \nThe comparison of the calculated and the experimentally measured thermal profile through the thermocouples demonstrate that the model can fairly predict the temperature profile during the heating and the cooling processes for the multi-pass welding process. The calculated average error was less than 10°C within the three pass welding, which is negligible compared to welding temperature.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,001 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,001 | 0,000 |
| Science ouverte | 0,001 | 0,000 |
| Intégrité de la recherche | 0,001 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,002 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».