Investigation of the energy response of EBT-2 GAFCHROMIC⢠film model
Notice bibliographique
Résumé
The aim of this project is to quantify the energy response of the existing EBT-2 model GAFCHROMICTM film and investigate for the eventual possible chemical compositions with improved energy response. In this work, the overall energy dependence of the EBT-2 model GAFCHROMICTM film is quantized through intrinsic and absorbed dose energy response. Absorbed dose energy response is studied by calculating dose to film sensitive layer and dose to water using DOSRZnrc of EGSnrcMP Monte Carlo user-code. The film was simulated inside a large body of solid water for megavoltage beams, while at kilovoltage energies the film was modeled in air. The simulations were repeated to score the dose to water for megavoltage and air kerma for kilo-voltage beams, respectively. The intrinsic energy response is quantified through a measurement of total energy response divided by the Monte Carlo calculated absorbed dose energy response. The measurements consisted of delivering an exact dose of 2 Gy to the sensitive layer of the film at orthovoltage energies (50 kVp, 120 kVp, and 180 kVp), 192Ir and 60Co beam. AAPM TG-51 and TG-61 reports were used to determine the dose-to-water and air-kerma in air in megavoltage and orthovoltage beams, respectively, while Monte Carlo simulated corrections were used to convert these results to the desired dose to the sensitive layer of the film. For EBT-2 model GAFCHROMICTM film, the overall energy dependence was found to vary by 39 % in the effective energy range from 24 keV to 1.25 MeV (for 60Co beam). It was determined that intrinsic (LET-dependent) energy dependence also plays an important role in the total energy dependence of EBT-2 model GAFCHROMICTM film and cannot be ignored.The absorbed dose energy dependence was also studied for a wide variety of film active layer compositions in a 10 keV-100 keV energy range as well as at 60Co using Monte Carlo simulations. The composition of the film active layer was varied according to physical limits set by the manufacturer. High atomic number elements (chlorine and bromine) were found to affect absorbed dose response drastically. Addition of bromine was found to affect film's response in the 40-50 keV region, while chlorine affected the entire region below 100 keV. Through numerical optimization of the composition of the active layer, it was thus possible to reduce the absorbed dose energy dependence and suggest new compositions with absorbed dose energy dependence variation of 4 % in the effective energy range of 28 keV to 1.25 MeV (for 60Co beam)
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,001 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,002 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».