Multi-objective optimization of dimpled sheets for high temperature loading conditions
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
This thesis investigates and optimizes aerothermal turbulator features which are designed with the added functionality of reducing stress under thermal loading conditions.The study is motivated by gas turbine components which are exposed to extreme loads and temperature leading to low service life or a reduction in engine efficiency.Previous work has shown that optimized porous void shapes can improve component life by orders of magnitude; however, non-porous components are also needed for applications which do not allow porosity.Recent findings showed a dimpled sheet structure which provides tunable mechanical behavior but which has not been optimized for peak stress or for aerothermal performance.This thesis investigates the mechanical and aerothermal behavior of a dimpled sheet, defined as a sheet with alternating indentations and protrusions of spherical caps in a square array, in high temperature loading conditions, such as those seen occurring in gas turbines.The dimpled sheet is first optimized independently for stress reduction in a single-objective problem formulation and then optimized for stress and thermal performance concurrently in a multi-objective optimization.Results of the single-objective stress optimization are presented and optimal regions in the design space are identified.The design space of thermal performance is also mapped.As expected, the optimal design regions for the thermal and stress objectives were not equivalent, highlighting the conflict between the two objectives and motivating the multi-objective study.The multi-objective study was carried out using surrogate models due to excessive costs to run physical simulations.The low cost of evaluation of the surrogate models enabled implementation of alternative schemes for multi-objective optimization.The results of each method are presented individually and collectively to assess the performance of each method and to construct the Pareto front showing the trade-off between stress reduction and improved heat transfer.While none of the selected schemes showed superiority over the others, the genetic and hybrid algorithms performed relatively better, while the gradient-based methods performed notably worst.The Pareto front representing the trade-off between stress and thermal performance was constructed by combining results from all algorithms and eliminating any dominated solutions.The Pareto front provides guidelines to select an optimal dimple geometry for a given gas turbine component based on the component requirements for stress and thermal performance.This thesis is dedicated to my sister, Brianna Delagran.She was my first and best teacher in the way only an older sister can be.In addition, I would like to acknowledge and thank the people who taught, mentored, and supported me leading up to, and throughout the creation of this thesis.To Professor Pasini, for teaching and guiding me in the research and academic worlds
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,001 | 0,001 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,001 | 0,001 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,001 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,001 | 0,001 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle