Aspects of nanoparticles dispersion and interaction in polymer nanocomposites
Notice bibliographique
Résumé
Polymer nanocomposites have attracted a great deal of attention during the past few decades. Benefiting from the nanoscale geometry, immense surface-to-volume ratio, and exceptional chemical and physical properties, nanoparticles are theoretically expected to enhance the performance of polymer systems. In practice, the preparation of polymer nanocomposites brings its own challenges. To achieve the best reinforcing effect, nanoparticles should be uniformly dispersed within the polymer matrix, and effectively interact with the polymer chains. The strong attractive forces that exist at molecular levels between the nanoparticles through their extensive interfacial area make it very challenging to overcome these issues. Furthermore, the presence of nanoparticles in the polymer matrix significantly alters the processing condition of the polymer system. Therefore, the main objective of this thesis is to investigate the dispersion and interfacial interactions in polymer nanocomposites. To avoid the uncertainties associated with the visual and qualitative analysis of dispersion, which is commonly used by the researchers, a robust algorithm was developed to automatically quantify the state of dispersion in optical and electron micrographs. Several experiments were carried out to perceive the influence of surface modification of nanoparticles on the performance of polymer nanocomposites. Two different material systems were examined: organoclay-modified polylactide (PLA), and carbon nanotube (CNT)-modified epoxy. It was shown that the proper surface modification of nanoparticles could facilitate the dispersion, and consequently, enhance the mechanical and physical performance of the host polymer. To understand the effect of processing conditions on the dispersion quality of nanocomposites, a systematic study on the dispersion stability of CNT-modified epoxy resin was performed. It was found out that at elevated temperatures, CNTs show little affinity for the resin; thereby, any factors that promote the possibility of contacts between the nanotubes may result in their reagglomeration. Consequently, during processing, the dispersion stability is highly influenced with the flow-induced mobility of nanotubes resulting from external shear forces or a change in the viscosity. The insights gained throughout this investigation can be used to optimize the processing conditions and manufacturing methods for maintaining a stable dispersion during processing, and consequently obtaining nanocomposites with enhanced performance.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,001 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».