Design and fabricate rocket engine
Notice bibliographique
Résumé
The objective of this project is to design and fabricate the Rocket Engine.This project describe the shape of Rocket that will fabricate follow the dimension that give by my supervisor.Actually there a several type of Rocket Engine.There are Rocket Engine based of thermal,water,hybrid,solid,and resistojet(electronic).So,the Rocket that will fabricate is from the solid type.One of the important thing a rocket is type of noozle,from the research in the internet De’Laval Noozle is the better type of noozle to use.Then material also another important thing in making Rocket.Material that will use must have good enough strenght to hold the explosion that will happen to move up the rocket.The better material is Stainless Steel it is light and have a good strenght,but cause of limited soucrce the material that use for make this Rocket is from mild steel.It is also have good strenght but it heavy than stainless steel.This project start from making the design and make it using Solid Work Software.Finish the design then the rocket can be made use a Lathe Machnine.Majority this rocket will be made by Lathe Machine.But from the start of fabricte the machine that involve also like bendsaw and drilling machine.Rocket engine that will be made have three part.First part is cap to close the hole on the upper body,a body and noozle.All this part will be assembly and were tied by bolt.It was susessfully done and able to function as needed.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,001 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,001 |
| Bibliométrie | 0,001 | 0,001 |
| Études des sciences et des technologies | 0,001 | 0,000 |
| Communication savante | 0,001 | 0,001 |
| Science ouverte | 0,001 | 0,001 |
| Intégrité de la recherche | 0,001 | 0,001 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,013 | 0,006 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».