NEW WOOD FIBER BIOCOMPOSITES BASED ON POLYLACTIDE AND POLYLACTIDE / THERMOPLASTIC STARCH BLENDS
Notice bibliographique
Résumé
This paper aims at developing natural fiber biocomposites based on biopolymers reinforced with wood fibers obtained from a thermo-mechanical refining process. Polylactide (PLA) and polylactide/thermoplastic starch blends (PLA/TPS) were used as matrices. Two grades of PLA, an amorphous and a semi-crystalline one, were considered with the purpose to investigate the effect of wood fibers on the crystallinity, and therefore, on mechanical properties of composites. Two grades of thermoplastic starch (TPS), different in plasticizer content and nature, were used. TPS content in the PLA/TPS blends was 50%. Moreover, two wood fiber types were selected, a hardwood (HW) and a softwood (SW), to state the effect of the fiber type on the biocomposite properties. Finally, the impact of different additives on biocomposite properties was studied with the purpose to enhance the biopolymer/wood fiber affinity with the best impact on the final mechanical performance. The biocomposites containing 30% by weight of wood fibers were obtained by co-rotating twinscrew extrusion. The properties are described in terms of morphology, thermal, rheological, and mechanical properties. With respect to wood type, there was almost no differentiation between reinforce ability of SW and HW for the studied formulations. Similar observations were done regarding the two grades of PLA on the mechanical properties (i.e. tensile strength and elastic modulus) of biocomposites. Concerning the thermal properties, semi-crystalline PLA biocomposites shown an increase in crystallization kinetics and a decrease of the fully crystallinity due to the wood fibers presence. A twofold increase in elastic modulus and an increment in tensile strength of 11% were observed for uncompatibilized PLA/wood fiber composites. Despite good tensile results and an inherent affinity between PLA and wood fibers, further improvement was reached by increasing the adhesion in adding coupling agents and by preserving the PLA molecular weight using a branching agent. The best mechanical results were achieved for composites containing the branching agent, most probably due to the branching of the PLA chains. PLA/wood fiber biocomposites present higher mechanical properties than polypropylene counterpart and are very promising candidates for many applications, especially in construction interior applications
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,001 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».