Estudio numérico del fallo por cortante en vigas de hormigón reforzado con fibras. Aplicación práctica en elementos prefabricados en el interior de una nave comercial situada en Igualada (Barcelona)
Notice bibliographique
Résumé
[EN] Recently, experimental campaigns are being carried out in the field of fibre reinforced concrete, in the Instituto de Ciencia y Tecnología del Hormigón (ICITECH) of Universitat Politècnica de València (UPV), as well as in other research centers at European level, in order to study the shear behavior of fiber reinforced concrete elements, in this particular case, of beams. The objective of this work is modeling and analyze a serie of beams of classic tests in reinforced concrete beams, made by Bresler y Scordelis in the sixties and repeated in 2004 by Vecchio y Shim in the Universidad de Toronto, in order to be able to validate the model with the results of the experimentation and apply it in a practical case to estimate the influence of the fibers on similar elements.. Modeling includes a set of sixteen beams (eight with steel fibers and eight with synthetic polypropylene macro-fibers). Half of them do not include transverse reinforcement, so their behavior against shear stress is determinant for the obtained results. The actual design of these beams in bending is currently resolved with conventional material models, applying a tensile strength and a model of material extracted from the current regulations, however, this is not solved in the case of elements whose failure mode is due to shear stress, due to a lack of knowledge of parameters that determine breakage and their behavior against actions with this type of material. The main challenge of this is to establish a constitutive behavior model of fiber reinforced concrete that provides a coherent response in elements dominated by tangential stresses. The numerical results obtained show reasonable results in estimation of critical loads and the load-deflection behavior. The validation is carried out with the experiments carried out. The previously described methods have been applied to prefabricated beam elements in lofts of a commercial center located in Igualada (Barcelona) for moderate lights and large loads, with considerable amounts of transversal reinforcement. From these verifications it is concluded that a saving of 55kg per beam can be achieved and the economic cost can be reduced even up to 15 %. Given this results achieved, it is recommended to extend this methodology in other types of element, which will require new tests and open the door to new lines of research.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,002 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,001 | 0,001 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,001 | 0,001 |
| Science ouverte | 0,001 | 0,000 |
| Intégrité de la recherche | 0,001 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,002 | 0,001 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».