Nozzle Testing System for General Electric’s Test and Research Development Centre
Notice bibliographique
Résumé
This report summarizes a design project initially submitted by General Electric Aviation to address their air atomizing nozzle troubleshooting needs at the Engine Test and Research Development Centre (TRDC) in Winnipeg, MB. Currently, the process to identify defective air atomizing nozzles solely by inspection is overly time consuming and ineffective. Therefore, the project’s objectives were to design a test rig that will streamline the process of identifying defective nozzles, as well as measure the spray pattern output of the nozzles for testing and comparison purposes. The client’s needs for the test rig are for it to provide and control water and air flow to a minimum of one nozzle in a self-contained manner. The water and air flows must be provided at 180qF, and up to a maximum pressure of 100 psig. The rig must also simultaneously collect and record data for the flow properties and the output spray pattern. Project deliverables included in this report are preliminary drawings of the test rig, a parts list with approved vendors, a cost report, and operating instructions. In order to develop a successful design, conceptual design solutions were first generated and screened for feasibility, and then more rigorous part evaluations and design calculations were performed for the selection of the final design components. For both the conceptual and final design stages, the test rig design was broken up into several main categories including the water and air delivery systems, the heating and insulation systems, the measurements and control system, and the overall frame assemblies. For the water delivery system, the selected pump and motor combination is an Oberdorfer R103M rotary gear pump coupled to a half-horsepower Baldor CDP3326 DC motor. The water tank capacity is 50 gallons and is installed on casters to be separately portable from the rest of the rig. An adjustable pressure regulator is included to allow for a variable water pressure supply to the nozzle(s) under test. The piping material for both water and air flows is 304 stainless steel. The selected air compressor for the final design of the air delivery system is Atlas Copco’s oil-injected rotary-screw compressor…
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,002 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,001 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,001 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».