Quantifying and Modeling the Effects of Internal Waves on Synthetic Aperture Sonar
Notice bibliographique
Résumé
Synthetic aperture sonar (SAS) is based on synthetic aperture radar, with a number of key factors increasing the complexity of data collection. One of the assumptions made with respect to SAS image reconstruction is the presence of a constant sound speed. As a nearfield imaging system, SAS is sensitive to the breaking of this assumption. The sound speed in the ocean varies with depth. Variations in sound speed can come in the form of internal waves. Internal waves propagating up the slope of the continental shelf are subject to breaking mechanisms that result in the propagation of boluses shoreward. Internal wave boluses are three dimensional features consisting of colder, higher density water. Since the internal wave boluses are composed of colder seawater, the speed of sound is different than in the surrounding environment. The change in sound speed changes the timing and phase of propagating acoustic rays causing degradation in SAS image quality. Not only do the internal waves violate the constant sound speed assumption made by SAS for image formation, but they also influence the travel of acoustic rays due to a geometric lensing effect. The lensing effect causes large refractive effects near the top of the bolus, resulting in a bright region and shadow region within the image. The goal of this study was to quantify the effects of internal waves on SAS image resolution and subsequently model these effects. The quantification of the effects was performed utilizing point targets within the SAS image. The point spread function of the point targets was estimated and used as a proxy for the image resolution and showed that internal waves can cause resolution loss on the order of two to four times than in the absence of a bolus or sound speed error. A numerical ray tracing model was used to estimate the resolution loss in SAS imagery in the presence of internal waves. An analytical model derived in order to better characterize the impacts of internal waves on SAS resolution. Beamforming was also performed over simulated imagery in the presence and absence of internal waves. The models agreed well with each other and the observed resolution loss in collected SAS data. Based on the success of modeling attempts, it is reasonable to develop a method for full inversion for bolus parameters. Given the agreement of the models with data it may be possible to develop methods to compensate for timing errors caused by the presence of internal waves and return the ideal image resolution. Presenter Bio Nicholas received his B.S. in Physics with a minor in Astronomy and Astrophysics from Villanova University in 2020. His undergraduate studies were supplemented by research in gravitational waves and frustrated magnetism. This research was accompanied by onsite work at the LIGO detector in Livingston Louisiana as well as the TRIUMF facility in Vancouver. Currently, Nicholas is an M.S. Ocean Engineering student with a focus on underwater acoustics and instrumentation. His research interests center around the analysis of internal waves and acoustic propagation and scattering in underwater environments.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,002 |
| Méta-épidémiologie (sens strict) | 0,001 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,001 | 0,001 |
| Science ouverte | 0,000 | 0,001 |
| Intégrité de la recherche | 0,001 | 0,001 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».