Effect of Support Conditions on the Behavior of Elastomeric Bearings
Notice bibliographique
Résumé
Many seismic protection techniques have been suggested over the years to mitigate the damaging effects of earthquake shaking. Seismic isolation is an earthquake-resistant design approach where a horizontally flexible layer is introduced at the base of a structure to decouple the structure from the motion of the ground. This is achieved through the installation of special devices called isolators at the base of columns. The concept of using isolators as a practical method has evolved into reality with the development of multilayer elastomeric bearings. The elastomeric bearings sometimes feature thick steel end plates and are connected to the superstructure and substructure by mechanical mean named bonded application. In buildings, traditional practice places the isolation system at the foundation level and calls for the construction of rigid diaphragms above and below. The flexural rigidity of these diaphragms prevents the isolators from experiencing rotations. However, in some application such as bridge applications, isolation of high-rise buildings and mid-height isolation, it is possible for elastomeric bearings to experience rotation. In another application, the bearings do not have end plates, and shear forces are transferred from the bearing to the superstructure and substructure by the frictional force that develops along the rubber-to--concrete or rubber-to-steel interface named unbonded application. This shear resistance is necessary to provide the bearing with an adequately large vertical stiffness. Since friction plays a dominant role in holding unbonded bearings in place, it is important to predict the effect of slip in this application. The main objectives of this study are to investigate the rotation effects on the horizontal behavior of bonded elastomeric bearings and study the effect of slip on the vertical behavior of unbonded bearings. To provide a better understanding and quantitative characterization of the behavior of elastomeric isolators under combined loading, an extensive nonlinear 3D Finite Element Analysis (FEA) study has been done. Moreover, three mechanical models available in the literature were modified to capture the effect of rotation on the lateral behavior of elastomeric bearings. In addition, a new macro model to find the lateral stability limit proposed and the results were compared against FEA. In order to study the axial-shear-bending interaction in elastomeric bearings, a setup was built at Applied Dynamic Laboratory to conduct the experimental tests on a 1/4-scale circular bearing. Furthermore, to study the effect of slip on the vertical behavior of unbonded bearings, a closed--form solution including the effects of the elastomer’ s bulk compressibility was provided and compared against FEA result.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,002 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,001 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,005 | 0,001 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».