Behaviour of Particle Attachment and Mobilization under Flushing Conditions in PVC Pipes using a Full-Scale Laboratory System
Notice bibliographique
Résumé
Within a drinking water distribution system, materials such as metals and biofilms are known to accumulate on the inner surface of pipes. This accumulation poses the risk of drinking water contamination. Due to the corrosion of iron components within a distribution network, iron oxide has proven to be one of the most prevalent metals that accumulates in drinking water pipes. As a result, water utilities invest in technologies to identify and flush material deposits from sections of their pipe networks. Nevertheless, the development of preventative strategies is still limited by the lack of knowledge about the material accumulation process and the behaviour of resuspended particles during flushing. In this thesis, a set of four experiments was conducted using a full-scale PVC pipe loop laboratory to better understand the attachment and mobilization of iron oxide particles on PVC pipe walls. Specifically, the investigation wanted to test the effectiveness of reversing the flushing direction from the operational flow to achieve increased material mobilization. To better quantify the results, a method was used to transform live turbidity readings into mass values. The experimental results showed that: (1) accumulation in the invert position of the pipes dominated with deposition affected by fluid velocity and particle size. Much of the total injected mass was attached to the pipe wall soon after it entered the system; (2) reversing the direction of the flushing flow can have a small increase in mobilization effectiveness. Using the reverse direction can also target material that was otherwise protected from flushing in the forward direction; (3) particles can be mobilized and then reattach under flushing conditions at faster rates than previously understood. This suggests that the total mobilized material is almost always higher than the amount of material removed from the system, and (4) pipe features such as wye-section or 90° elbows produce small flow recirculation zones that can become areas of high material accumulation. The research findings contribute to a better understanding of particulate deposition in drinking water pipes as well as their mobilization and reattachment behaviour under flushing conditions. It further identifies possible areas of concern within a distribution system and strategies to address them to improve overall water quality.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,001 | 0,000 |
| Science ouverte | 0,001 | 0,000 |
| Intégrité de la recherche | 0,001 | 0,001 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».