Mechanical and tribological properties of cold sprayed Ni/CrC-NiCr metal matrix composites
Notice bibliographique
Résumé
Cold spray (CS) is a solid-state deposition method involving severe plastic deformation of micron-sized powder particles accelerated to supersonic speeds. These particles are propelled through a compressed gas stream, such as air, nitrogen, or helium, using a de Laval nozzle. Since CS operates at low temperatures, no melting takes place during deposition. This offers a distinct advantage over other thermal spraying techniques, resulting in unique and significant advantages. Metal-matrix composites (MMC) combine the high hardness, wear resistance, and thermal stability of ceramics with the ductility, toughness, and thermal conductivity of metals.In the development of coatings through CS technology, the feedstock powder is crucial for achieving the desired engineering properties, and it becomes more significant when cermet MMC powders are used. This dissertation aims to experimentally investigate the mechanical and tribological properties of a cold-sprayed cermet based MMC. Chromium carbide-nickel chromium (CrC-NiCr) was used as the cermet particle, where CrC is a ceramic and NiCr is a ductile binder. This cermet particle was used in the MMC by using Ni as the overall binder. Therefore, the MMC is designated as (CrC-NiCr)/Ni. The first part of the study focuses on: (i) investigating the influence of increasing the metallic (NiCr) binder percentage in the cermet particle, and (ii) exploring the effects of varying the matrix-to-cermet ratio, i.e. Ni to (CrC-NiCr) ratio, in the feedstock blend on the microstructure and mechanical properties of the CS deposits. Results indicate that increasing the binder phase percentage in the cermet particles enhances deposition efficiency, cermet area fractions, and interparticle adhesion. This also results in coatings with porosity less than 1%, as well as improved ductility and shear strength. To address inter-splat defects and brittleness of the MMCs, the second part of this study examines the effects of post-spray annealing on the mechanical properties and microstructure. Scanning transmission electron microscopy (STEM) demonstrated improved interparticle bonding between matrix splats, with fractographic analyses indicating a shift from brittle to ductile fracture mechanisms. Mechanical tests reveal that post-process annealing significantly enhances the ultimate tensile strength (UTS), elongation, and adhesion shear strength of the coatings, however, it adversely affects coating hardness. The third part of this study investigates the effects of various post-spray heat treatments on the microstructure and tribological behavior of cold-sprayed Ni/CrC-NiCr metal matrix composite (MMC) coatings. Post spray (PS) laser heat treatment (LHT) and plasma arc heat treatments (PAHT), along with two furnace annealing temperatures were employed. Results show the wear rate of the MMCs is significantly influenced by the type of heat treatment. PS-LHT and PAHT facilitated the formation of thin oxide tribofilm (mainly Cr2O3) that acted as solid lubricants, reducing metal-to-metal contact and abrasive wear.--Author's abstract
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,001 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,001 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».