Establishing patterns in the formation of properties of fire-resistant biocomposites based on a hybrid binder
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
The process that forms the properties of fire-resistant biocomposites based on wood sawdust and a binder from a mixture of gypsum and an intumescent coating based on PVA dispersion has been investigated. The task addressed is to ensure the stability of biocomposites based on a gypsum binder to changes under operating conditions. This is important since the production of biocomposites from renewable sources for construction is relevant. It has been proven that when thermally exposed to the biocomposite samples, no ignition occurred, the maximum temperature of the flue gases was about 84°C. When using a gypsum binder, a non-combustible structure was formed on the surface of the biocomposite, which prevented the sample from igniting. For a biocomposite based on a binder from a mixture of gypsum and an intumescent coating based on PVA dispersion (hybrid binder), charring of the sample surface is characteristic, which prevents its ignition. In addition, the results of determining the process of wetting biocomposites with test liquids showed that the obtained solids belong to hydrophilic materials with high water wettability. Analysis of the results of experiments on water absorption of biocomposites reveals that the maximum mass gain of the biocomposite on gypsum binder under the influence of moisture was almost 27% and the main increase in moisture occurred in the first 5 days of exposure. The mass gain of the biocomposite samples on hybrid binder was less than 10% due to the formation of a shell on the surface of sawdust. The value of the compressive strength of biocomposites showed that the sample formed on gypsum binder is significantly fragile. However, for the biocomposite formed on hybrid binder, the ultimate strength is 1.88 MPa, which is provided by the adhesive properties of the intumescent coating. Thus, there are grounds to argue about the possibility to effectively design operationally stable biocomposites for construction
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,001 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle