Solubility of Sodium Salts in Kraft Black Liquor and the Impact on Evaporator Fouling
Notice bibliographique
Résumé
The evaporation of black liquor is a key step in the chemical recovery cycle of kraft pulp mills. Black liquor is concentrated stepwise by evaporating water in multiple effects evaporators (MEE). The majority of the scaling and fouling instances during black liquor evaporation are attributed to sodium salts. The focus of this thesis is to obtain the necessary solubility data for sodium oxalate and sodium carbonate-sodium sulfate salts and thus generate empirical models for sodium salt solubility that can be applied in mills to help reduce evaporator scaling. Sodium oxalate solubility was studied in the temperature range of 50 °C to 140 °C and a dry solids range of 14% to 70% dry solids. Four mill liquors were studied for the work done below 100 °C, and sodium oxalate solubility was not found to be liquor-dependent but rather depended only on the concentration of sodium, concentration of oxalate, and temperature. Two different empirical formulas were developed for solubility below 100 °C and solubility above 100 °C. These formulas were applied by a mill with sodium oxalate scaling in several of their evaporator effects. Double salts of sodium carbonate and sodium sulfate precipitate in the evaporation sets of all kraft pulp mills. Most of the solubility work focused on the transitions between the different salt species and the solubility of the carbonate-rich salts, about which there is relatively little data in the present literature. Empirical formulas were developed for use by mills and were utilized in the following studies with electrostatic precipitator (ESP) ash. Electrostatic precipitator (ESP) ash is used by the pulp and paper industry in two different ways to try and reduce sodium salt scaling. The first is to dissolve it in black liquor so that a sulfate-rich double salt precipitates first rather than carbonate-rich salts, which causes more severe scaling. The second approach is to add the ash above the solubility limit to increase the crystal surface area for precipitating salts to precipitate onto. The experiments showed that ash added below the solubility limit dissolves quickly, reaching saturation as fast as 10 min. It also found that ash, when added to carbonate-rich black liquor above the solubility limit, remains as burkeite and sodium sulfate and, within 24 h, does not undergo dissolution and re-precipitation to a carbonate-rich salt. This may help explain the varied success of using precipitator ash to reduce sodium salt scaling in kraft black liquor evaporators.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,001 | 0,001 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,001 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».