Characterization of Expanded Polypropylene Bead Foams with Modified Steam-Chest Molding
Bibliographic record
Abstract
Steam is commonly used in polymer bead foam sintering due to its high heat transfer capacity. However, the pressure loss unavoidable during flow through the beads causes a temperature decrease and thereby negatively affects the sintering behavior. In order to reduce the sensitivity of the temperature to the pressure variation, hot air was added to the steam line. The effects of the flow rate, the pressure, and the temperature of the hot air on the surface roughness, thermal properties, and mechanical properties of the molded products were studied. The results showed that the introduction of hot air at a flow rate of 120 L/min decreased the total steaming time by about 32%. Further, a decrease of 16 °C in the processing temperature was observed, which decreased the surface roughness by 50%. Hot air improved the heat flow and thereby enhanced the uniformity of the tensile properties across the molded part.
Fetched live from OpenAlex and de-inverted. Abstracts are not stored in this database: the inverted indexes are 8.6 GB of the frame’s 9.3 GB of text, and the host has 13 GB free.
How this classification was reachedexpand
Full frame distilled prediction
Teacher imitationNot calibrated prevalence, not ground truth. Human validation pending. Learned from the 10,348 direct Codex labels and 10,348 direct Gemma labels. Candidate is the union of thresholded teacher heads; consensus is their intersection. These outputs are machine_predicted_unvalidated and are not human labels or direct frontier model labels.
Codex and Gemma teacher scores by category
| Category | Codex | Gemma |
|---|---|---|
| Metaresearch | 0.000 | 0.000 |
| Meta-epidemiology (narrow) | 0.000 | 0.000 |
| Meta-epidemiology (broad) | 0.000 | 0.000 |
| Bibliometrics | 0.000 | 0.000 |
| Science and technology studies | 0.000 | 0.000 |
| Scholarly communication | 0.000 | 0.000 |
| Open science | 0.000 | 0.000 |
| Research integrity | 0.000 | 0.000 |
| Insufficient payload (model declined to judge) | 0.000 | 0.000 |
Machine scores (provisional)
The two teacher heads of the student model, read on this work. A score orders the frame for review; it never asserts a category, and the validation status ships verbatim with every row.
Baseline scores from an immature model (maturity gate not passed, 7 training rounds). Scores rank; they never assert a category.
score_only:v0-immature-baseline · verbatim from the scoring run: score_only means the number may rank works, and no category label ships from itClassification
machine, unvalidatedMachine predicted; a candidate call from one teacher head, not a consensus.
How this classification was reached, model by model and score by score, is at the end of the page under "How this classification was reached".