MétaCan
Menu
Back to cohort
Record W2531087940 · doi:10.25439/rmt.27590769

Investigations into the synthesis, characterisation and uranium extraction of the pyrochlore mineral betafite

2016· dissertation· en· W2531087940 on OpenAlexaboutno aff
Scott A. McMaster

Bibliographic record

VenueRMIT Research Repository (RMIT University Library) · 2016
Typedissertation
Languageen
FieldMaterials Science
TopicNuclear materials and radiation effects
Canadian institutionsnot available
Fundersnot available
KeywordsUraniumNuclear powerEnvironmentally friendlyWaste managementEnriched uraniumElectricityEnvironmental scienceExtraction (chemistry)Natural resource economicsBusinessChemistryEngineeringMaterials scienceEconomicsMetallurgy

Abstract

fetched live from OpenAlex

The usage of nuclear power, to generate base-load electricity, has steadily increased in acceptance as a more environmentally friendly alternative to fossil fuels since its first commercial introduction in the 1950s. Increasing consumption of uranium and the rising demand for nuclear fuel has led to a deficiency of high grade uraninite and pitchblende deposits. This has led to increased attention on the refractory uranium pyrochlore betafite due to its abundance in currently exploited uranium deposits.<br><br>In this document primary work was conducted on natural betafite from Ambatofotsy Madagascar, Miarinarivo Madagascar and Silver Crater Mine, Canada. X-ray diffraction analysis showed that anatase was the only crystalline compound present in each of the unheated samples. After being heated to 1200 °C all samples exhibited diffraction lines characteristic of betafite and rutile, indicating that the betafite present in the preheated samples was amorphous (metamict). Electron probe microanalysis of the samples showed a high degree of compositional heterogeneity throughout each sample, most likely caused by aqueous fluid interactions forming secondary alteration products. All unheated samples were subject to a sulfuric acid leach over 6 h with the extent of uranium dissolution correlated with the degree of alteration. The most highly altered sample had 42% U dissolution while the least-altered exhibited only 7%.<br><br>Due to the differences in the degree of alteration observed in the natural samples it was decided to synthesise a pure betafite sample via a solid state synthesis route. The optimum conditions for the synthesis of betafite were found to be heating the reactants required at 1150 °C for 48 h under an inert gas atmosphere. XPS analysis of the sample showed that the uranium in the synthesised betafite was predominately present in the U5+ oxidation state. A minor amount of U6+ was also detected which was possibly due to surface oxidation.<br><br>Dissolution studies were then conducted on the synthetic betafite to investigate the influence of various parameters on leaching. The results showed the uranium dissolution curves obtained over a range of experimental conditions demonstrated three discrete segments representing significantly different rates of uranium dissolution. The first segment occurred in the initial minute and involved extremely rapid dissolution. This segment made up for the majority of the overall uranium dissolution obtained over the test period (~2.0% U). The second segment between 1 – 120 minutes was characterised by slow uranium dissolution rates which could be partially influenced by altering the experimental conditions. The uranium dissolution rate in the third segment was negligible due to passivation of the sample surface leaving no exposed uranium available for leaching.<br><br>Long term dissolution studies were also conducted on the synthetic betafite sample in order to determine the leach rate over a 90 day leach period. The results of these experiments showed very minor influences were observed when each of the standard parameters (temperature, [H2SO4], [FeTOT] and redox potential) were studied. The influence of fluoride addition showed a slightly greater leach rate than that achieved with high acid concentration, though the main difference between this experiment and other experiments conducted with no fluoride was the solubilisation of the metals Ti, Nb and Ta which were not observed to leach in experiments where fluoride was not added.<br><br>Post leach characterisation of synthetic betafite identified only minor changes occurred in the sample. These changes included the formation of pyrochlore and a greater concentration of rutile was observed to be present. Analysis via XPS of the post leach residues showed the samples contained similar U oxidation states to those observed in the preleached samples. Moreover, significantly greater Ta was observed via XPS in the post leach sample indicating that the Ta concentration had increased on the surface of the mineral. This indicated a possible passivation layer which caused the low rate of dissolution that was observed to occur.

Fetched live from OpenAlex and de-inverted. Abstracts are not stored in this database: the inverted indexes are 8.6 GB of the frame’s 9.3 GB of text, and the host has 13 GB free.

How this classification was reachedexpand

Full frame distilled prediction

Teacher imitation

Not calibrated prevalence, not ground truth. Human validation pending. Learned from the 10,348 direct Codex labels and 10,348 direct Gemma labels. Candidate is the union of thresholded teacher heads; consensus is their intersection. These outputs are machine_predicted_unvalidated and are not human labels or direct frontier model labels.

metaresearch head score (Codex)0.001
metaresearch head score (Gemma)0.000
Version: codex-gemma-dda1882f352aValidation status: machine_predicted_unvalidated
Candidate categoriesScience and technology studies
Consensus categoriesnone
DomainCandidate signal: none · Consensus signal: none
Study designCandidate signal: Bench or experimental · Consensus signal: Bench or experimental
GenreCandidate signal: Empirical · Consensus signal: Empirical
Teacher disagreement score0.224
Threshold uncertainty score1.000

Codex and Gemma teacher scores by category

CategoryCodexGemma
Metaresearch0.0010.000
Meta-epidemiology (narrow)0.0000.000
Meta-epidemiology (broad)0.0000.000
Bibliometrics0.0000.000
Science and technology studies0.0010.000
Scholarly communication0.0000.001
Open science0.0010.000
Research integrity0.0000.000
Insufficient payload (model declined to judge)0.0000.000

Machine scores (provisional)

The two teacher heads of the student model, read on this work. A score orders the frame for review; it never asserts a category, and the validation status ships verbatim with every row.

Baseline scores from an immature model (maturity gate not passed, 7 training rounds). Scores rank; they never assert a category.

Opus teacher head0.013
GPT teacher head0.242
Teacher spread0.229 · how far apart the two teachers sit on this one work
Validation statusscore_only:v0-immature-baseline · verbatim from the scoring run: score_only means the number may rank works, and no category label ships from it

Classification

machine, unvalidated

Machine predicted; a candidate call from one teacher head, not a consensus.

Study designBench or experimental
Domainnot available
GenreEmpirical

How this classification was reached, model by model and score by score, is at the end of the page under "How this classification was reached".

Quick stats

Citations0
Published2016
Admission routes1
Has abstractyes

Explore more

Same venueRMIT Research Repository (RMIT University Library)Same topicNuclear materials and radiation effectsFrench-language works237,207