Coupled Geomechanics-Reservoir Simulation of UTF Phase A Project Using a Full Permeability Tensor
Bibliographic record
Abstract
Abstract In this research study, we conducted a coupled thermalstress-fluid flow numerical modeling on the UTF Phase A SAGD project in order to investigate the fundamental geomechanical behavior involved in the SAGD process and to gain insight into the reservoir response to temperature and pore pressure changes. The numerical simulation is carried out using a self-developed coupled finite element model which incorporates our proposed strain-induced permeability model. The obtained simulation results were compared with the measured data. Introduction Thermal recovery processes involve coupling between heat transfer, multiphase flow and stress/deformation, which has become an increasingly important subject in the petroleum field(1). Particularly, the coupling is crucial in problems such as borehole stability, hydraulic fracturing and injection/production induced deformation of the ground surface during the thermal recovery processes in the heavy oil or oil sand reservoirs. Numerical modeling of the coupled processes is historically carried out in the areas of geomechanics modeling and the reservoir simulation. The former is to compute the stress-strain behavior, therefore the deformation; the latter is to essentially model the multiphase flow and heat transfer in porous media. Each of these disciplines simplifies the part of the problem that is not of primary interest. These approaches are unacceptable in situations where the coupling is strong and the changes of porosity and permeability cannot be accounted by rock compressibility alone. Gutierrez and Lewis(2) extend Biot's theory to multiphase fluid flow in deformable porous media. Based on their formulation, they conclude that the coupling between the geomechanics and the multiphase flow occurs simultaneously. Thus, fully coupled system equations of deformations, multiphase flow and heat transfer should be solved simultaneously. Development of such kinds of fully coupled geomechanics-multiphase flow-heat transfer simulators needs tremendous effort, since the existing FEM geomechanics codes and the FDM reservoir simulators cannot be used. Settari and Mourits(3) present an approach to couple the stress-strain behavior to multiphase flow, heat transfer using porosity as a coupling parameter. The geomechanics module and the thermal reservoir simulator are used in a staggered manner. Pore pressure and temperature changes are calculated from the thermal reservoir simulator and transferred to the geomechanics module. The stress and the displacement changes are then calculated in the geomechanics simulation. An iterative algorithm is used to ensure that the porosity calculated from the geomechanics module is the same as that from the thermal reservoir simulator. The staggered technique employed to solve the coupled system equations allows for the use of the existing geomechanics codes in conjunction with a standard reservoir simulator. Currently, most of the commercial coupled geomechanics-multiphase flow-heat transfer simulators are developed in this way. The disadvantage of these kinds of coupled simulators is that the thermal reservoir module, usually developed using finite difference method (FDM), cannot accommodate the full permeability tensor, since they adopt the standard discretization scheme such as 5-spot for 2-D problems and 7-spot for 3-D problems. In this paper, the development of a coupled geomechanicsmultiphase flow-heat transfer simulator using finite element method (FEM) is described with the use of the Galerkin's least squares (GLS) technique(4) to stabilized the saturation equation.
Fetched live from OpenAlex and de-inverted. Abstracts are not stored in this database: the inverted indexes are 8.6 GB of the frame’s 9.3 GB of text, and the host has 13 GB free.
How this classification was reachedexpand
Full frame distilled prediction
Teacher imitationNot calibrated prevalence, not ground truth. Human validation pending. Learned from the 10,348 direct Codex labels and 10,348 direct Gemma labels. Candidate is the union of thresholded teacher heads; consensus is their intersection. These outputs are machine_predicted_unvalidated and are not human labels or direct frontier model labels.
Codex and Gemma teacher scores by category
| Category | Codex | Gemma |
|---|---|---|
| Metaresearch | 0.000 | 0.000 |
| Meta-epidemiology (narrow) | 0.000 | 0.000 |
| Meta-epidemiology (broad) | 0.000 | 0.000 |
| Bibliometrics | 0.001 | 0.000 |
| Science and technology studies | 0.000 | 0.000 |
| Scholarly communication | 0.000 | 0.000 |
| Open science | 0.000 | 0.000 |
| Research integrity | 0.000 | 0.000 |
| Insufficient payload (model declined to judge) | 0.001 | 0.000 |
Machine scores (provisional)
The two teacher heads of the student model, read on this work. A score orders the frame for review; it never asserts a category, and the validation status ships verbatim with every row.
Baseline scores from an immature model (maturity gate not passed, 7 training rounds). Scores rank; they never assert a category.
score_only:v0-immature-baseline · verbatim from the scoring run: score_only means the number may rank works, and no category label ships from itClassification
machine, unvalidatedMachine predicted; a candidate call from one teacher head, not a consensus.
How this classification was reached, model by model and score by score, is at the end of the page under "How this classification was reached".