Application of Tempe Cell to Measure Soil Water Characteristic Curve along with Geotechnical Properties of Oil Sands Tailings
Bibliographic record
Abstract
The traditional Tempe cell can be used to adequately determine the soil water characteristic curve (SWCC) for soils that do not undergo significant volume change as matric suction is increased, such as coarse-grained material such as sand with a low air entry value (AEV) (<500 kPa). When soils undergo substantial volume change as soil suction increases, such as fine-grained silts, clays, and oil sands tailings material, the soils need to be tested with distinctly different methods involving two apparatuses when using the Tempe cell. A single-step Tempe cell technique was developed and tested to measure the geotechnical and unsaturated properties of oil sands tailings samples. A series of nine Tempe cells were simultaneously used to measure the geotechnical and unsaturated soil properties of untreated fluid fine tailings (FFT) and treated flocculated centrifuged tailings (FCT). The results of the single-step Tempe cell technique provide several useful engineering functions relating matric suction to water content (SWCC), void ratio (volume change), solids content, and undrained shear strength. Both the traditional and single-step Tempe cell techniques yield comparable SWCC results, but the single-step Tempe cell yields result about three times faster than the traditional Tempe cell. The geotechnical results indicate that both the solids content and undrained shear strength of the FCT are greater than those of the untreated FFT and this indicates that flocculation and centrifugation increase solids content and undrained shear strength of the treated samples. Furthermore, the results indicate that the FFT starts at higher fine void ratio than the FCT and loses more water (volume change) at matric suctions lower than 7 kPa. Beyond 7 kPa, the compressions of both samples become the same. The single-step Tempe cell technique is, however, labor-intensive. The number of Tempe cell can be reduced to six depending on the starting load of the test. The use of the single-step Tempe cell technique in providing fast estimates of SWCC and geotechnical properties for oil sands tailings will be attractive to practitioners who intend to incorporate matric suction in oil sands geotechnical engineering problems.
Fetched live from OpenAlex and de-inverted. Abstracts are not stored in this database: the inverted indexes are 8.6 GB of the frame’s 9.3 GB of text, and the host has 13 GB free.
How this classification was reachedexpand
Full frame distilled prediction
Teacher imitationNot calibrated prevalence, not ground truth. Human validation pending. Learned from the 10,348 direct Codex labels and 10,348 direct Gemma labels. Candidate is the union of thresholded teacher heads; consensus is their intersection. These outputs are machine_predicted_unvalidated and are not human labels or direct frontier model labels.
Codex and Gemma teacher scores by category
| Category | Codex | Gemma |
|---|---|---|
| Metaresearch | 0.000 | 0.000 |
| Meta-epidemiology (narrow) | 0.000 | 0.000 |
| Meta-epidemiology (broad) | 0.000 | 0.000 |
| Bibliometrics | 0.000 | 0.001 |
| Science and technology studies | 0.000 | 0.000 |
| Scholarly communication | 0.000 | 0.000 |
| Open science | 0.000 | 0.000 |
| Research integrity | 0.000 | 0.000 |
| Insufficient payload (model declined to judge) | 0.000 | 0.000 |
Machine scores (provisional)
The two teacher heads of the student model, read on this work. A score orders the frame for review; it never asserts a category, and the validation status ships verbatim with every row.
Baseline scores from an immature model (maturity gate not passed, 7 training rounds). Scores rank; they never assert a category.
score_only:v0-immature-baseline · verbatim from the scoring run: score_only means the number may rank works, and no category label ships from itClassification
machine, unvalidatedMachine predicted; a candidate call from one teacher head, not a consensus.
How this classification was reached, model by model and score by score, is at the end of the page under "How this classification was reached".