Climate change velocity metrics calculated for three climate variables across Finland

This dataset contains files that show the climate change velocity metrics calculated for three climate variables across Finland. The climate velocities were used to study the magnitude of projected climatic changes in a nation-wide Natura 2000 protected area (PA) network (Heikkinen et al., 2020). Using fine-resolution climate data that describes the present-day and future topoclimates and their spatio-temporal variation, the study explored the rate of climatic changes in protected areas on an ecologically relevant, but yet poorly explored scale. The velocities for the three climate variables were developed in the following work, where in-depth description of the different steps in velocity metrics calculation and a number of visualisations of their spatial variation across Finland are provided: Risto K. Heikkinen 1, Niko Leikola 1, Juha Aalto 2,3, Kaisu Aapala 1, Saija Kuusela 1, Miska Luoto 2 & Raimo Virkkala 1 2020: Fine-grained climate velocities reveal vulnerability of protected areas to climate change. Scientific Reports 10:1678. https://doi.org/10.1038/s41598-020-58638-8 1 Finnish Environment Institute, Biodiversity Centre, Latokartanonkaari 11, FI-00790 Helsinki, Finland 2 Department of Geosciences and Geography, University of Helsinki, FI-00014, Helsinki, Finland 3 Finnish Meteorological Institute, FI-00101, Helsinki, Finland The dataset includes GIS compatible geotiff files describing the nine spatial climate velocity surfaces calculated across the whole of Finland at 50 m × 50 m spatial resolution. These nine different velocity surfaces consist of velocity metric values measured for each 50-m grid cell separately for the three different climate variables and in relation to the three different future climate scenarios (RCP2.6, RCP4.5 and RCP8.5). The baseline climate data for the study were the monthly temperature and precipitation data averaged for the period from 1981 to 2010 modelled at a resolution of 50-m, based on which estimates for the annual temperature sum above 5 °C (growing degree days, GDD, °C), the mean January temperature (TJan, °C) and the annual climatic water balance (WAB, the difference between annual precipitation and potential evapotranspiration; mm) were calculated. Corresponding future climate surfaces were produced using an ensemble of 23 global climate models for the years 2070–2099 (Taylor et al. 2012) and the three RCPs. The data for the three climate variables for 1981–2010 and under the three RCPs will be made available in separately via METIS - FMI's Research Data repository service (Aalto et al., in prep.). The climate velocity surfaces included in the present data repository were developed using climate-analog approach (Hamann et al. 2015; Batllori et al. 2017; Brito-Morales et al. 2018), whereby velocity metrics for the 50-m grid cells were measured based on the distance between climatically similar cells under the baseline and the future climates, calculated separately for the three climate variables. In Heikkinen et al. (2020), the spatial data for the Natura 2000 protected areas were used to assess their exposure to climate change. The full data on N2K areas can be downloaded from the following link: https://ckan.ymparisto.fi/dataset/%7BED80465E-135B-4391-AA8A-FE2038FB224D%7D. However, note that the N2K areas including multiple physically separate patches were treated as separate polygons in Heikkinen et al. (2020), and a minimum size requirement of 2 hectares were requested. Moreover, the digital elevation model (DEM) data for Finland (which were dissected to Natura 2000 polygons to examine their elevational variation and its relationships to topoclimatic variation) can be downloaded from the following link: https://ckan.ymparisto.fi/en/dataset/dem25_astergdem25. The coordinate system for the climate velocity data files is: ETRS-TM35FIN (EPSG: 3067) (or YKJ Finland/Finnish Uniform Coordinate System (EPSG: 2393)). Summary of the key settings and elements of the study are provided below. A detailed treatment is provided in Heikkinen et al. (2020). Code to the files (four files per each velocity layer: *.tif, *.tfw. *.ovr and *.tif.aux.xml) in the dataset: (a) Velocity of GDD with respect to RCP2.6 future climate (Fig 2a in Heikkinen et al. 2020). Name of the file: GDDRCP26.* (b) Velocity of GDD with respect to RCP4.5 future climate (Fig. 2b in Heikkinen et al. 2020). Name of the file: GDDRCP45.* (c) Velocity of GDD with respect to RCP8.5 future climate (Fig. 2c in Heikkinen et al. 2020). Name of the file: GDDRCP85.* (d) Velocity of mean January temperature with respect to RCP2.6 future climate (Fig. 2d in Heikkinen et al. 2020). Name of the file: TJanRCP26.* (e) Velocity of mean January temperature with respect to RCP4.5 future climate (Fig. 2e in Heikkinen et al. 2020). Name of the file: TJanRCP45.* (f) Velocity of mean January temperature with respect to RCP8.5 future climate (Fig. 2f in Heikkinen et al. 2020). Name of the file: TJanRCP85.* (g) Velocity of climatic water balance with respect to RCP2.6 future climate (Fig. 2g in Heikkinen et al. 2020). Name of the file: WABRCP26.* (h) Velocity of climatic water balance with respect to RCP4.5 future climate (Fig. 2h in Heikkinen et al. 2020). Name of the file: WABRCP45.* (i) Velocity of climatic water balance with respect to RCP8.5 future climate (Fig. 2i in Heikkinen et al. 2020). Name of the file: WABRCP85.* Note that velocity surfaces e and f include disappearing climate conditions. Summary of the study: Climate velocity is a generic metric which provides useful information for climate-wise conservation planning to identify regions and protected areas where climate conditions are changing most rapidly, exposing them to high rates of climate displacement (Batllori et al. 2017), causing potential carry-over impacts to community structure and ecosystem functions (Ackerly et al. 2010). Climate velocity has been typically used to assess the climatic risks for species and their populations, but velocity metrics can also be used to identify protected areas which face overall difficulties in retaining ecological conditions that promote present-day biodiversity. Earlier climate velocity assessments have focussed on the domains of the mesoclimate (resolutions of 1–100 km) or macroclimate (>100 km scales), and fine-grained (<100 m) local climatic conditions created by variation in topography ('topoclimate'; Ackerly et al. 2010; 2020) have largely been overlooked (Heikkinen et al. 2020). This omission may lead to biased exposure assessments especially in rugged terrain (Dobrowski et al. 2013; Franklin et al. 2013), as well as a limited ability to detect sites decoupled from the regional climate (Aalto et al. 2017; Lenoir et al. 2017). This study provided the first assessment of the climatic exposure risks across a national PA (Natura 2000) network based on very fine-grained velocities of three established drivers of high latitude biodiversity. The produce fine-grain climate velocity measures, 50-m resolution monthly temperature and precipitation data averaged for 1981–2010 were first developed, and based on it, the three bioclimatic variables (growing degree days, mean January temperature and annual climatic water balance) were calculated for the whole study domain. In the next phase, similar future climate surfaces were produced based on data from an ensemble of 23 global climate models, extracted from the CMIP5 archives for the years 2070–2099 and the three RCP scenarios (RCP2.6, RCP4.5 and RCP8.5)26. In the final step, climate velocities for each the 50 x 50 m grid cells were measured using climate-analog velocity method (Hamann et al. 2015) and based on the distance between climatically similar cells under the baseline and future climates. The results revealed notable spatial differences in the high velocity areas for the three bioclimatic variables, indicating contrasting exposure risks in protected areas situated in different areas. Moreover, comparisons of the 50-m baseline and future climate surfaces revealed a potential wholesale disappearance of current topoclimatic temperature conditions from almost all the studied PAs by the end of this century. Calculation of climate change velocity metrics for the three climate variables The overall process of calculation of climate velocities included three main steps. (1) In the first step, we developed high-resolution monthly average temperature and precipitation data averaged over the years 1981–2010 and across the study domain at a spatial resolution of 50 × 50 m. This was done by building topoclimatic models based on climate data sourced from 313 meteorological stations (European Climate Assessment and Dataset [ECA&D]) (Klok et al. 2009). Our station network and modelling domain covered the whole of Finland with an additional 100 km buffer. However, it was also extended to cover large parts of northern Sweden and Norway for areas >66.5°N, as well as selected adjacent areas in Russia (for details see Heikkinen et al. 2020). This was done to capture the present-day climate spaces in Finland which are projected to move in the future beyond the country borders but have analogous climate areas in neighbouring areas; this was done to avoid developing a large number of velocity values deemed as infinite or unknown in the data for Finland. The 50-m resolution average air temperature data were developed for the study domain using generalized additive modelling (GAM), as implemented in the R-package mgcv version 1.8–7 (R Development Core Team 2011; Wood 2011). In this modelling we utilised variables of geographical location (latitude and longitude, included as an anisotropic interaction), topography (elevation, potential incoming solar radiation, relative elevation) and water cover (sea and lake proximity), and subsequent leave-one-out cross-validation tests to assess model performance (for full process description, see Aalto et al. 2017; Heikkinen et al. 2020). The resulti

Fetched live from OpenAlex and de-inverted. Abstracts are not stored in this database: the inverted indexes are 8.6 GB of the frame’s 9.3 GB of text, and the host has 13 GB free.