Transport of Ultradispersed Catalytic Particles Through Bitumen at Upgrading Temperatures
Notice bibliographique
Résumé
Mass transfer and deposition of fine particles in cylindrical channels has received considerable attention for a long time due to its practical significance and direct application in industry.For example, this knowledge is helpful in aerosol classification and its deposition under electrical fields, formation of deposits in heat exchangers and pipelines, hydrodynamic field chromatography, thrombus formation in organs and, many other areas (Adamczyk and Van De Ven, 1981).Recently, this phenomenon has gained particular importance on the dispersion of ultradispersed catalysts for heavy crude oil and bitumen hydroprocessing due to its practical significance and direct application (Pereira-Almao et al., 2007;Galarraga and Pereira-Almao, 2010;Loria et al., 2011).Ultradispersed catalysts have been studied for heavy oil and bitumen hydroprocessing as an alternative for typical supported catalysts.An advantage when comparing ultradispersed catalysts to supported ones, in the case of heavy oil and bitumen hydroprocessing, is that the former could be easily incorporated into the reaction media to flow together with the feedstock to be treated, in this manner residence times can be longer than those conventionally used for hydroprocessing (Pereira-Almao et al., 2005;Pereira-Almao, 2007).Recent publications (Loria et al., 2009b(Loria et al., , 2009c(Loria et al., , 2010) ) have demonstrated the feasibility of the transport of ultradispersed particles based on their motion through diverse viscous media enclosed in horizontal cylindrical channels.Time-dependent, two and three-dimensional convective-dispersive models, which simulated the transient deposition and suspension of ultradispersed particles immersed in viscous media inside a horizontal cylinder, were developed, solved and experimentally validated.In addition, a study on the effect of the fluid medium properties over the dispersion coefficient was performed.The dispersion coefficient is a proportionality constant that serves to quantify the particle concentration due to convection and dispersion and should be expressed as a function of the properties of the fluid medium (Loria et al., 2010).The solution of the previously mentioned models provides a particle concentration profile along the horizontal channel, as well as information regarding the critical particle size that allows particles to remain suspended in the fluid medium enclosed in this geometry.This knowledge can be applied in the previously referred ultradispersed catalysis of heavy crude oils and bitumen.In these systems, it is important to ensure that catalytic particles remain suspended in the fluid medium in order to make use of their catalytic activity and also, to www.intechopen.com
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,001 | 0,001 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».