High contact resistance readings on clean microwave mobile contacts
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
In a real-life environment, metallic surfaces are always covered with an insulating film of some type. This can be partly minimized by the use of noble metals for contacts, but even in case of gold, the best material in terms of reactivity with the environment, such films occur. The contact resistance consists therefore in constriction resistance and film (or tunneling) resistance. Gold is known to have little affinity in creating frictional polymers (5% when compared with platinum) but it is known to have some affinity regarding absorption of carbon atoms forming the so-called carbon-oxygen film. Analysis of contacts that exhibited high contact resistance revealed presence of carbon and oxygen imbedded in the reed and probe contact surfaces. These carbon/oxygen areas were not visually identifiable using standard optical techniques, including UV light, and standard inspection magnification of 20 to 40 x. X-ray photo-electron spectroscopy (XPS) analysis revealed that there were no other elements present in the contact and non contact areas of the corresponding paths except Au, C and O. At the same time, measured bonding energies for carbon and oxygen, confirmed the most probable composition of the carbonaceous monolayer. Non-contact areas taken as a background in the evaluation had slightly different composition, however with the same type of carbon structures i.e. bonding energies. XPS measurements conducted on various contacts showed that the thickness of such a film is usually less than 10 nm. The work presents an analysis that shows, based on RF data interpretation, that the mobile contact member and the fixed contact member were in intimate contact and the equivalent dielectric constant of the insulating layer is higher than one. In addition, using typical values for the tunnel resistivity presented in reference books by R. Holm and K. E. Pitney it is possible to obtain high contact resistance readings comparable with the experimental data. Paper also examines test methodology and limitations in terms of ability to detect tunnel conduction through certain thicknesses of surface films.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle