Control over the Process of Thermo-Oxidative Degradation of Polymers in a Solution
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
The article discusses the process of low molecular rubber synthesis by the method of thermo-oxidative degradation as a controlled object. It was found that the control parameters affecting the degradation rate are the following: concentration of reaction initiator, temperature and mass concentration of the polymer. The main control parameters are the following: degree of degradation, quality of the resulting polymer and time of reaction. It was found that for effective control the process temperature and concentration of the initiator are to be stabilized in the vicinity of the predetermined value, and mass concentration is determined by dosage of initial components. In this case, the kinetics of the degradation process can be described as a linear function of time. I.e., the degree of degradation is linearly related to duration of reaction. Then, defining the initial quality of the polymer (its average molecular weight), the degradation process is performed till the time the predetermined value of degradation is reached. Since the initiator is consumed during the degradation, in order to stabilize its concentration, it is proposed to add the initiator into the reaction medium. We obtained a mathematical description that describes the kinetics of the process during continuous and divided feeding of the initiator, and dependency for calculating initiator feed rate. It has been shown that if the initiator is fed in a divided manner, linearity of degradation kinetics over time is ensured, which simplifies the technology of the process. Parameters of the approximating linear dependence of the kinetics of degradation have been determined. It has been shown that, even at the initial stage, the kinetics of degradation steadily tends to the linear asymptote. The asymptote's tilt angle depends on the constant of degradation rate (and consequently in the temperature of reaction) and on the initial concentration of the initiator. Degradation kinetics offset by the Y-axis depends on the initial molar concentration of the polymer. Thus, it is possible to control degradation rate by adjusting initial polymer concentration.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,001 |
| Études des sciences et des technologies | 0,000 | 0,001 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle