A Technique for the Evaluation of Instantaneous Heat Fluxes for the Horizontal Strip Casting of Aluminum Alloys.
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Transient heat transfer between solidifying light metals strips and a moving substrate has been investigated. For this purpose, an experimental apparatus was constructed, consisting of a cold moving substrate onto which molten metal from a containment mold is deposited. The substrate was flame sprayed with various commercial coatings while its speed and the thicknesses of strip produced matched industrial values. The primary objective of this work was to study the effects of some important variables, such as roughness of substrate, type of coating, thickness of strip and initial superheat, on heat fluxes. Substrate speeds in the range of 0.4–1.2 m/s were employed and strips with thicknesses between 1 and 5 mm were produced. The heat fluxes were determined "inversely" by an inverse heat transfer technique, using temperature measurements from thermocouples embedded within the substrate. Peak heat fluxes between 0.6 and 3.0 MW/m2 were found for the diverse experimental conditions investigated. The heat transfer coefficients were deduced using a one-dimensional, finite-difference model, based on the corresponding calculated heat fluxes. Values of h ranged from 700–5000 W/m2·K. The various coatings used, and the different levels of substrate roughness, contributed to the wide range of h values reported. The heat transfer coefficient was found to increase with initial superheat, thickness of strip and smoother coatings. Correlations were derived between peak heat fluxes and the most significant variables. More importantly, the transient evolution of q and h after their peak values were assessed and good correlations could be derived. The findings of this work are believed to be useful for industrial processes, since they give a better picture of the influence of some important variables on the heat transfer involved for this particular type of metal-substrate contact. This is relevant, for example, to horizontal direct strip casting processes currently under investigation for the production of low carbon steel strips.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle