Experimental and numerical investigation of vortex‐induced flame propagation in a biomass furnace with tangential over fire registers
Notice bibliographique
Résumé
Abstract The tangentially fired furnaces have evolved because of rapid contacting of the fuel and air flame impingement, and the increased particulate residence time due to vortex motion. Tangentially fired units have a good record in being able to meet emission regulation on NOx as a result of their flexibility and the ability to control the heat release rate. Yet, the flow inside the tangentially fired furnaces is known to have its own peculiar aerodynamics; it is quite complicated in such a way that it is not easy to reach a satisfactory model to describe it. The drawbacks with the traditional tangentially fired furnaces are burner velocities. Low velocities are not suitable for fuels having high volatile contents, as ignition occurs in or near the burner causing slugging and distortion problems. Very high velocities on the other hand are undesirable as fuel particles can centrifuge out of the main combustion zone as unburnt carbon. The test boiler used in this work has tangential over fire registers located in the side walls, which are directed to form an imaginary circle at the centre to aid the suspension burning. The vortex formed by these jets, is then induced by the under grate air in reaching the higher levels in the furnace. In the test furnace, the fuel is not coming along with the tangential over fire air, but enters the furnace through the bagasse spreaders and carried by the distributor air. The combustion of bagasse and the propagation of the flame within the furnace are influenced by the tangential over fire air and the under grate air. In the present work, the furnace is simulated and analyzed for the propagation of flame and the patterns at various heights of the furnace supported by the measurements.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».