Static loading test on a 45 m long pipe pile in Sandpoint, Idaho
Notice bibliographique
Résumé
Design of piled foundations for bridge structures for the realignment of US95 in Sandpoint, Idaho, required a predesign static loading test on an instrumented, 406 mm diameter, closed-toe pipe pile driven to 45 m depth in soft, compressible soil. The soil conditions at the site consist of a 9 m thick sand layer on normally consolidated, compressible, postglacial alluvial deposits to depths estimated to exceed 200 m. Field explorations included soil borings and CPTu soundings advanced to a depth of 80 m. The clay at the site is brittle and strain-softening, requiring special attention and consideration in geotechnical design of structures in the area. Effective stress parameters back-calculated from the static loading test performed 48 days after driving correspond to beta coefficients of about 0.8 in the surficial 9 m thick sand layer and 0.15 at the upper boundary of the clay layer below, reducing to 0.07 in the clay layer at the pile toe, and a pile toe bearing coefficient of 6. The beta coefficients are low, which is probably due to pore pressures developing during the small shear movements during the test before the ultimate resistance of the clay was reached. The analyses of the results of the static loading test have included correction for residual load caused by fully mobilized negative skin friction down to 10 m depth and fully mobilized positive shaft resistance below 30 m depth, with approximately no transfer of load between the pile and the clay from 10 m depth through to 30 m depth.Key words: pile loading test, residual load, strain-gage instrumentation, load distribution, setup, pile modulus.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,001 | 0,001 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,002 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».