SMA Dampers for Cable Vibration: An Available Solution for Oscillation Mitigation of Stayed Cables in Bridges
Notice bibliographique
Résumé
Several solutions have been proposed to mitigate the vibrations of stay cables in bridges, which are subjected to wind, rain and traffic loads. One possible solution relates to the use of semi-active devices, such as the ones based on magneto-rheologic fluids. These devices need guaranteed electrical power, together with computational effort and technical attention. In contrast, shape memory alloy (SMA) wires were studied for application as passive elements. In the present work, the properties of SMA that are required to realize dampers provided with an appropriate reliability are discussed. In particular, the fatigue/fracture life of the SMA wires and the thermal effects induced by both external temperature and the self-heating process are studied. The SMA dampers were applied to stayed cables of realistic size and tested in "facilities." Namely, the cables No 1 of 45 m length available at the ELSA-JRC in Ispra, Italy, and the 50 m cable of IFSTTAR near Nantes, in France, were considered. The experimental results establish a reduction of the vibration amplitude to one half or less than the one observed in the un-damped case. Furthermore, the installation of the SMA dampers causes an increase of the cable frequency. Performing a Windowed Fourier Transform or a Wavelet Transform analysis the evolution of frequency with the signal amplitude was studied. The change of amplitude produces a change of stiffness in the SMA. The adoption of an appropriate phenomenological model of the hysteresis cycle permits to perform numerical simulations using standard Finite Elements Analysis tools such as, for instance, the ANSYS software.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,001 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,001 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,002 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».