Interface transmissivity and hydraulic conductivity of GCLs below poured concrete
Notice bibliographique
Résumé
ABSTRACT: The performance of four geosynthetic clay liners (GCLs) used as a hydraulic barrier below concrete-lined sewage treatment lagoons was examined based on a series of laboratory tests aimed at measuring: (i) the lateral flow of synthetic wastewater through the interface between each GCL product and a 0.1 m thick cast-in-place concrete above the GCL over a 14-month period and, from this data, calculating the concrete/GCL interface transmissivity (θ); and (ii) the hydraulic conductivity (k) of the GCLs below poured concrete when exposed to (iia) synthetic wastewater under isothermal conditions, or (iib) a series of wet–dry and/or cool–heat cycles for up to 12 months. The four GCLs have either sodium or polymer-enhanced sodium bentonite, and either granular or powdered bentonite. When the wastewater head above the GCL was 1.0 m (stress on concrete, σ = 10 kPa), θ for the GCL with granular sodium bentonite was 4 × 10−11 m2/s. For the same GCL, when the head increased to 2.5 m (σ = 25 kPa), the value of θ was reduced by about one order of magnitude to 2 × 10−12 m2/s. For the GCL which has polymer-enhanced granular bentonite, the value of θ was similar to (and possibly lower than) that for the GCL with untreated granular bentonite. For the GCL with powdered bentonite and cover geotextile impregnated with 1280 g/m2 of bentonite, the values of θ were 2 × 10−12 and 4 × 10−13 m2/s at 1.0 and 2.5 m head, respectively. With a reduction in the amount of the impregnated powdered bentonite in the cover geotextile to 840 g/m2, θ was 1 to 9 × 10−12 m2/s. The lowest k (3.2 × 10−11 m/s) for a GCL below concrete and exposed to wastewater under isothermal conditions was measured for the GCL with polymer-enhanced granular bentonite, whereas the highest value of k (1.9 × 10−10 m/s) was for the GCL with standard granular bentonite. Under 0.5 m head and 3 kPa stress, the k of the GCL below concrete and exposed to wet–dry cycles was 1.2–2.6 times the k of the GCL exposed to wastewater under isothermal conditions. Analytical calculations for the leakage through concrete/GCL liners for the four GCLs showed that the leakage was below the allowable limits specified by the Australian, British, and American standards.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,001 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».