Contribution of Geomechanics in Evaluation of Heat Transfer Mechanisms at Mobile Zone of SAGD and ES-SAGD
Notice bibliographique
Résumé
Abstract Efficient recovery of heavy oil and bitumen in western Canada has widely been applied with thermal-based processes. The well-known Steam-Assisted Gravity Drainage (SAGD) takes advantage of the strong dependency of bitumen viscosity on temperature ranging from 10 to 250 °C. The latent heat of injected steam is released as the steam chamber develops and causes the bitumen to mobilize and drain under the effect of gravity toward the production well. Co-injection of solvent with steam (ES-SAGD) may help to reduce the oleic phase viscosity adjacent to chamber edge by offsetting the temperature reduction effect. While many researchers are currently tackling the optimal operational conditions from a fluid property point of view (pressure, solvent fraction, etc.), less attention was paid to the impact of heat transfer due to incorporation of geomechanics into occurring physics. Such simplifications in analyzing the real processes physics would result in neglecting of the convection flow of heat along with conduction. Considering the dramatic changes in temperature at the chamber edge, the induced thermal geomechanical responses would lead to a faster fluid movement. The fluid mobility at the edge of chamber would even increase more, mainly because of temperature-dependant heat capacity of water, changes in absolute and relative permeabilities, and possible wettability alteration. If a multi-component solvent is used (ES-SAGD), the assessment of production performance would get more complicated due to the different condensation dynamics of light versus heavy components and the possible gas-blanket effect caused by the co-injected solvent. In this study, the geomechanical changes due to pressure and temperature effects were considered at the steam chamber, for both SAGD and ES-SAGD scenarios. The thermo-poro-elasticity concept, with elastic constitutive rock behaviour, was chosen for geomechanical study. The primary impacts of geomechanics on the physics of ES-SAGD were rock and fluid alterations, and changes in petrophysical properties (porosity and absolute permeability). Assuming a potential change in rock and fluid interaction due to geomechanics, the same analysis was conducted for a multi-component solvent with different condensation profiles. It was shown how the use of solvent will adversely affect the induced thermal geomechanics contribution. The findings of this paper can be used as a guideline for further experimental studies on the effect of geomechanics in thermal-based recovery processes.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».