Influence of Horizontal Section Sinuosity and Lateral Accuracy on Heavy Oil Cold Production from Close-Spaced Senlac/Winter Saskatchewan Wells
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Abstract Horizontal well drilling for heavy oil cold production in Western Canada was initiated in 1988, and has matured to the extent that over 550 horizontal wells have been drilled into the Cummings/Dina channel trend between Senlac and Winter, Saskatchewan. A significant fraction of the more recent wells have been drilled as infills to enhance reservoir drainage. Reviews of the performance of these wells suggest drilling accuracy in all three dimensions within the horizontal section strongly affects the performance of original wells and the ability to optimize placement of infill horizontal wells between the original wells. Horizontal trajectory control has improved significantly in the last 10 years, the latest improvement being 'inclination at the bit.' Selected wells were analyzed to determine the key factors between horizontal section sinuosity and both production rate and ultimate recovery, and the changes in the effect of these key factors over the last 10 years. Incentive and methodology for development of current flatter wells is discussed, and predictions of improved production are given. Initial spacing in many areas was nominally 75 meters, and several areas are being infill drilled to 37.5 meter spacing to increase reservoir drainage. The heels of the infill wells are placed between the toes of the original wells to avoid expected greater oil depletion and water coning at the heels of the original wells. Several recent infill wells encountered lost circulation and/or magnetic interference from offsetting original wells, indicating the locations of the original wells obtained from MWD data were not accurate. For subsequent infill wells gyros were run in the original wells, and the gyro-based original well locations disagreed with the MWD-based locations. This prompted an examination of existing drilling, MWD, gyro, and magnetic North positioning data and technology. This paper discusses the theoretical and practical aspects of drilling flatter horizontal wells, establishing the locations of existing horizontal wells, and optimum placement of infill horizontal wells between the existing wells in the Senlac/Winter, Saskatchewan pools.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,001 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle