Investigating Hydraulic Fracturing in Tight Gas Sand and Shale Gas Reservoirs in the Cooper Basin
Notice bibliographique
Résumé
Abstract The majority of discoveries in the Cooper basin have been structural traps on regional highs, with significantly less information available from the deep tight sand and shale plays. Recently, exploration and appraisal of the large, prospective gas resources in the deep troughs began. While these plays have been known for some time (Hillis et al. 2001), data has only recently been presented detailing the unconventional targets in the Nappamerri trough (Pitkin et al. 2012). This paper focuses on unconventional reservoirs within the southern Cooper basin, specifically, a southern extension of the Nappamerri trough and the Mettika embayment, part of the Tenappera trough. Senex Energy began to review the potential of the unconventional reservoirs in its Cooper basin acreage in 2010. This paper focuses on three wells, Skipton 1, Kingston Rule 1, and Hornet 1, which were hydraulically fractured in early 2013. In the well planning stage of the project, it was identified that sufficient data needed to be collected to characterize both the formation and hydraulic fracturing behavior. The requirement for fracturing diagnostics was critical because of the complex nature of hydraulic fracturing within the Cooper basin. To manage these unknowns, the data that were collected included core testing, diagnostic injection tests on most intervals, surface tiltmeters to measure fracture azimuth and orientation, radioactive (RA) tracers to infer fracture height, and chemical tracers to estimate the flowback contribution from each stage. The results showed high treating pressures and near-wellbore pressure loss (NWBPL) in many stages of the fracture treatments. Generally, the lower the fracture gradient, the easier the job was to place and the better the reservoir quality. The RA tracers showed good containment in the one well in which they were used, with heights of 20 to 60 ft. The main barriers to height growth appeared to be changes in lithology. The surface tiltmeter results showed an azimuth that was different than expected from borehole breakout data in the basin. This has been seen in other studies in the Cooper basin. While the exact reason for this requires additional work, possible explanations are discussed within the paper.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,001 | 0,001 |
| Études des sciences et des technologies | 0,001 | 0,001 |
| Communication savante | 0,001 | 0,001 |
| Science ouverte | 0,000 | 0,001 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».