Design for Block Shear of Coped Beams with a Welded End Connection
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
This paper presents a numerical study of the block shear strength and behavior of coped beams with welded end connections. The finite-element (FE) method was employed to predict the structural behavior and block shear capacity of specimens tested during a previous experimental study conducted by the writers. In general, the finite-element analysis results compared well with the test results, and the validated finite-element models were used subsequently to further investigate the structural behavior of the connections through a parametric study. The results show that the block shear capacity of coped beams with welded end connections, in general, increases with increasing connection rotational stiffness and increasing web block aspect ratio (depth/width). It was found that, for design purposes, connections with a large web block aspect ratio (large depth and narrow width) should be used to reduce the effects of loading eccentricity between the centroid of the weld group of the connection and the support. The finite-element analysis results also show that, for the coped beams with small connection rotational stiffness, shear yielding only occurs over a small portion of the shear area. Based on the test and the finite-element analysis results, a design equation previously proposed by the first writer for evaluating the block shear capacity of a coped beam with a welded clip angle connection was modified to account for the effects of the connection rotational stiffness. The predictions based on the modified design equation compare well with the test and the finite-element analysis results. The ratio of the test and the FE capacities to the predicted capacities has a mean of 1.01 and a coefficient of variation of 0.05.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle