Influence of the efficacy of interfacial modification on the coarsening of cocontinuous PS/HDPE blends during quiescent annealing
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Abstract This article studies the quiescent annealing of three different cocontinuous polystyrene/high‐density polyethylene blends modified with two types of interfacial agents of widely different efficacies. Quantitative analysis of phase growth was obtained using mercury porosimetry. In a previous work, it was shown that one of these modifiers, a symmetrical diblock copolymer, has a high affinity for the interface and demonstrates virtually no micelle formation prior to saturation of the blend interface. The other modifier, a hydrogenated SEBS of 70/30 composition, forms micelles at elevated concentrations of modifier. In this study, it is shown that the cocontinuous phase size grows linearly without modifier, whereas the addition of both interfacial modifiers significantly suppresses the PE/PS phase coarsening and results in nonlinear phase growth behavior. The effect of the diblock copolymer on suppressing coarsening, however, is much more effective than that for the triblock case clearly supporting the tendency toward micelle formation for that latter modifier. In the case of unmodified PE/PS, the driving force for capillary pressure effects is so high that it is the capillary instability phenomena that dominate the coarsening and hence result in a linear growth of pore size with annealing time. When interfacial modifiers are added, the influence of reduced interfacial tension and lower pore size polydispersity significantly diminishes both capillary pressure effects and capillary instability phenomena. In that case, capillary pressure becomes the main rate determining step resulting in a nonlinear dependence of pore size with annealing time. It is shown that both the viscosity of the phases and the temperature of annealing can strongly influence coarsening behavior at low levels of interfacial modifier. Under all those conditions, however, nonlinear phase growth for the partially compatibilized system was maintained. These results clearly show that careful quantitative coarsening experiments using mercury porosimetry can be used as a tool to analyze the efficacy of interfacial modifiers for highly continuous or cocontinuous systems. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 711–721, 2006
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,001 |
| Études des sciences et des technologies | 0,000 | 0,002 |
| Communication savante | 0,000 | 0,001 |
| Science ouverte | 0,001 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle