Implementation of the Three-Phase Switched Reluctance Machine System for Motors and Generators
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
This paper presents two three-phase switched reluctance machine systems. One is the dual motors drive for the electric locomotive traction; the other is the variable-speed generator system for wind power applications. The principles of the switched reluctance machine system operated at four quadrants, the scheme of the symmetrical traction at quadrant I and quadrant III, and the scheme of the symmetrical regenerative braking control at quadrant II and quadrant IV, are given. The transient phase current analysis and the energy analysis of the switched reluctance machine system at the operational state of braking or generating are evaluated, and the rotor position and the peak value of the phase current at three different conditions are given. The closed-loop rotor speed control of the main motor, synchronization of the rotor speed, and balance distribution of loads between the main motor and the subordinate motor have been implemented by the fuzzy logic algorithm. The closed-loop output power control of the switched reluctance wind power generator system implemented by regulating the turn-on angle of the main switches with fuzzy logic algorithm and fixed turn-off angle of the main switches is also presented. The major components of the two prototypes are explained in detail. The experimental results of the dual 7.5-kW three-phase 6/4 structure switched reluctance motors (SRMs) parallel drive system prototype are included. It is shown that the maximum difference in the output torque of the two motors at the same given rotor speeds is within 10.00% and the maximum difference in the practical rotor speed of the two motors is within 5.00%. The tested results of three-phase 12/8 structure switched reluctance variable-speed wind power generator system show that the error of the closed-loop output power control is within 2.2%, while the rotor speed range is close to the ratio of 1:3 with the low rotor speed 405 r/min. The average dc line current of the power converter can be utilized as a feedback signal for the actual output torque of SRM drive or a feedback signal for the actual output power of switched reluctance generator system.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle